Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
HVAC Company in Olmos Park, TX
Olmos Park sits as its own city, a one-square-mile enclave surrounded entirely by San Antonio, and that independence changes every HVAC job we do here. Homes built in the 1920s through 1950s weren’t designed for central air, so retrofit ductwork, permitting through Olmos Park city hall, and load calculations for soaring ceilings are part of our daily work. Most repairs run $150-$700 depending on the system, and our technicians arrive with parts for Carrier, Trane, Lennox, and the other major brands these homes typically carry. Call (817) 402-2972 and you’ll reach a live person, any hour.
Why Olmos Park Homes Are Different
The housing stock here is unlike anything in surrounding Bexar County. Spanish Colonial Revival, English Tudor, and Mediterranean custom residences built between the 1920s and 1950s dominate the landscape, with thick masonry walls, plaster finishes, and ceiling heights that would be extravagant in any modern subdivision. These homes were retrofit for central air conditioning decades after construction, which means ductwork was threaded through spaces never intended to carry it.
We regularly find layered systems in Olmos Park attics: original 1950s or 1960s trunk lines running alongside newer flex duct additions, often with significant leakage and capacity mismatches. Many original duct chases remain buried in interior walls or attic framing, completely uninsulated by current standards. In a 130°F attic, those chases become radiant heat exchangers that rob cooling before it ever reaches the living space. Our technicians check attic duct surface temperatures before condemning a compressor, because the ductwork itself is frequently the root cause of “weak system” complaints.
Permitting adds another layer. Because Olmos Park maintains its own city government entirely separate from San Antonio’s Development Services Department, contractors must pull permits through Olmos Park city hall specifically. The city inspects to its own schedule, and familiarity with that process saves homeowners delays on replacement jobs.
Climate pushes systems hard too. Olmos Park shares San Antonio’s brutal summer pattern, routinely 98-102°F with Gulf humidity, but the large square footage and high ceilings mean heat gain far exceeds an average tract house. Manual J load calculations aren’t optional here; they’re essential to right-sizing equipment. San Antonio’s hard Edwards Aquifer water also accelerates scale buildup in condensate drains and any hydronic components we encounter.
Our Main Olmos Park Services
Most calls we receive from Olmos Park fall into three categories: cooling repair in summer, heating repair during the brief but sharp winter cold snaps, and full system replacement when age or repeated failures make continued repair impractical.
AC Repair in Olmos Park
AC repair in Olmos Park often involves tracking down refrigerant leaks in systems that have been overworked for years, or clearing condensate drains clogged with Edwards Aquifer scale. We also see failed capacitors and contactors in units that cycle excessively due to undersized or leaking ductwork. Before we quote a compressor replacement, we verify the duct system isn’t the actual problem. Our trucks carry common parts for Rheem, York, Daikin, Bryant, and the other major brands found in these homes. AC Repair in Olmos Park covers our full diagnostic process and what to expect when we arrive.

Furnace Repair in Olmos Park
Furnace repair here typically means igniter or flame sensor failures in converted gas systems, or blower motor issues in air handlers tucked into tight attic spaces. Many Olmos Park homes have heating equipment installed during a 1980s or 1990s renovation, now well past its reliable lifespan. We check heat exchangers carefully on older units, and we’ll show you exactly what we find before recommending any work. Furnace Repair in Olmos Park details our inspection process and the 365-Day Done Right Promise that comes with every repair.

AC Installation in Olmos Park
AC installation in Olmos Park requires more planning than a standard swap-out. Equipment must be sized with a proper Manual J load calculation accounting for the home’s actual heat gain, not its square footage alone. Ductwork often needs modification or replacement, and permitting through Olmos Park city hall adds a step that San Antonio-only contractors sometimes miss. We provide a written fixed price before any work begins, schedule the install date, and handle rebate and financing paperwork. AC Installation in Olmos Park explains our full process.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Olmos Park
Our technicians train on nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We stock common capacitors, contactors, igniters, and flame sensors for Rheem, York, Daikin, and Bryant systems locally, which means most Olmos Park repairs don’t wait on parts. See our brands for the full list and what we keep on hand.
Pricing for HVAC Company in Olmos Park, TX
| Service | Typical range in Olmos Park |
|---|---|
| AC Repair | $150-$650 |
| Furnace Repair | $150-$700 |
| AC Installation | $3,500-$7,500 |
| Tune-Up | $80-$200 |
What pushes Olmos Park prices toward the higher end: difficult attic access for duct or equipment work, the need to modify or replace original duct chases, and the additional permitting step through Olmos Park city hall. Every job starts with a written price handed to you before any tool comes out, and that price does not change at the door. That’s The Kingswell Way, not a special offer.
Neighborhoods We Serve in Olmos Park
Olmos Park is compact, but the character varies block by block. Our technicians know the specific access and equipment challenges each area presents, from narrow estate drives to homes with original carriage-house garages converted to mechanical rooms.
- Olmos Park Estates
- Olmos Park Terrace
- Contour Drive area
- East Olmos Park (McCullough Avenue corridor)
- Alameda Circle vicinity
From any point in Olmos Park, our response time is typically under 90 minutes during business hours for non-scheduled calls, and our 24-hour live-answer dispatch means you’re never waiting until morning for a human.
Service Area – Cities Near Olmos Park
Dispatch and scheduling for Olmos Park are coordinated from our Dallas-Fort Worth office, with crews serving the area locally. We also work in San Antonio, FL (a separate market), Houston, TX, Fort Worth, TX, and Dallas, GA. Each city page has its own local pricing and conditions, because a home in Houston faces different challenges than one in Olmos Park.
Serving Olmos Park, TX - Our Local Coverage Area
We’re based in the Olmos Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Olmos Park
Yes. Olmos Park is an independent municipality with its own permitting authority, separate from San Antonio’s Development Services Department. We pull permits through Olmos Park city hall on every job that requires one, and we handle that paperwork as part of our standard process. Call (817) 402-2972 if you have questions about a specific project.
Our live-answer dispatch operates 24 hours a day, 7 days a week. For heating or cooling emergencies in Olmos Park, we typically have a technician on site within 90 minutes during regular hours. After-hours calls are triaged immediately, and we schedule true emergencies same-night when system failure creates a health risk in extreme temperatures.
Uneven cooling in Olmos Park usually traces to the original ductwork, not the equipment itself. Uninsulated duct chases from the 1950s or 1960s, layered retrofit additions with leakage, and capacity mismatches are common in these homes. We measure attic duct surface temperatures and static pressure before recommending equipment changes, because replacing a compressor won’t fix a duct system that’s bleeding cooling into a 130°F attic. Call (817) 402-2972 for a diagnostic that checks the whole system, not just the box outside.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Olmos Park Customers Say
"The repair was done well and quickly. Scheduling over the phone was a little clunky and I got transferred twice, but the tech himself was great and on time."
- Brett Haygood"Furnace was short cycling all winter. They diagnosed a bad sensor instead of condemning the whole unit like I feared. Cheap fix, honest call."
- Russ Tiedemann"Thermostat and a weak blower. Fixed both in one visit, explained the guarantee, and didn't leave a mess. I've already recommended them to my neighbor."
- Natalie Esposito







Before
After
Before
After
Before
After