Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Hurst
A new AC installation in Hurst typically runs $3,500-$7,500 for a full system replacement, with most jobs completed in one to two days once equipment is selected. We size every unit from a fresh load calculation, not the faded nameplate on the old condenser.
We’ve been working the Hurst market long enough to know the real job isn’t hanging equipment on a new slab. Hurst built out by the mid-1980s, so nearly every call we get is a replacement inside a 1960s-1980s slab ranch with attic ductwork that’s cooked through forty to sixty summers. Our crews dispatch from our Dallas-Fort Worth office and carry the common coil dimensions, duct boot sizes, and SEER2 matchups we need for the locked-in housing stock around Bedford-Euless Road, Pipeline Road, and the neighborhoods off Precinct Line. When you’re ready to talk through what’s actually happening in your attic, call us at (817) 402-2972. We’ll hand you a written price before a single tool comes out.
Why Coldharbour Heating & Air Is Hurst’s Preferred AC Installation Company
Our AC Installation team knows Hurst’s housing stock the way a local knows which intersections flood in a thunderstorm. We don’t send a salesman with a tape measure and a catalog. We send a technician who has already pulled failed flex duct from a 1972 ranch attic and knows to check the boot collars before blaming the tonnage.
Homeowners in Hurst tell us the same story: the last company swapped the outdoor unit, the house still wouldn’t cool, and nobody looked upstream at the duct. We don’t do that. Our written price covers the full scope, duct remediation included if we find separated liners, and our 365-Day Done Right Promise means we come back and correct the work at no charge if anything fails inside a full year.
Phones here are answered by a live person 24 hours a day, 7 days a week. No voicemail tree, no “press one for service.” If you’re in Hurst and your system died in July, you get a human who can schedule a technician and explain what happens next.
Furnace Installation in Hurst
Furnace Installation in Hurst is almost always paired with AC replacement in these slab ranch homes, since the air handler or furnace shares the same closet, attic, or rooftop mechanical space. A full furnace changeout in Hurst runs $3,500-$7,500, same range as AC installation, because the labor and duct connectivity overlap heavily. We see gas furnaces in attic installations fighting the same 150°F summer heat that degrades the flue and heat exchanger seals, and we see closet-mounted units where clearance is measured in inches, not feet.
Gas Furnace Changeouts in Tight Closets
Many Hurst ranches have furnace closets tucked between the kitchen and garage with barely enough room to swing a door. We measure static pressure, combustion air supply, and clearances to combustibles before we quote. The written price includes any closet modifications needed for code-compliant venting.
Electric Air Handler and Heat Pump Upgrades
Since Winter Storm Uri in 2021, we’ve done more heat pump conversions in Hurst’s older slab homes. These houses were under-insulated for that kind of cold, and homeowners want dual-fuel or all-electric systems with better efficiency ratings. We handle the electrical load check and rebate paperwork as part of the install scope.
HVAC Installation in Hurst
HVAC Installation in Hurst means replacing entire systems in homes that were never designed for modern equipment dimensions or airflow requirements. The $3,500-$7,500 range covers condenser, coil, furnace or air handler, and the duct remediation that most of these jobs actually need. We don’t separate “equipment” from “ductwork” into two surprise invoices. One written price. One scheduled day.
Load Calculations Before Equipment Selection
We run a Manual J load calculation on every Hurst replacement. The old nameplate tonnage is usually wrong because the original builder oversized for the leaky envelope, or undersized for the duct losses nobody measured. We measure windows, insulation, infiltration, and duct leakage, then spec equipment that matches the real load.
Attic Duct Remediation as Standard Practice
In Hurst’s 1970s neighborhoods, we expect to find flex duct inner liners separated from outer jackets at the register collars. Decades of 150°F attic heat does that. We re-seal, re-strap, or replace duct boots before the new system starts up, so your equipment isn’t fighting a 4-ton load with 3-ton airflow.
Trusted Brands We Service in Hurst
Our technicians train on nine major residential brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Hurst’s replacement market, we stock common Rheem and York coil widths and Bryant cabinet dimensions that match the restricted access we find in these older ranches. Daikin mini-split components stay on the truck for the ductless jobs we do in Hurst’s garage apartments and additions where running new duct is impractical. Parts availability matters when your attic is 140°F and the family is sleeping in the living room. We don’t make you wait for a warehouse run to Dallas.
Common AC Installation Problems We See in Hurst Homes
- Right-sized equipment, wrong ductwork. A new SEER2 condenser and coil can’t move air through duct boots that have separated at the collar. We find this in maybe half the 1970s ranches we open up in Hurst, and it’s the first thing we check before we quote tonnage.
- Static pressure from tight installations. Closet and rooftop placements in dense Hurst neighborhoods restrict return air pathways. The blower motor and capacitor cycle harder than designed, shortening life. We measure static pressure and modify duct transitions to give the new unit room to breathe.
- Refrigerant line insulation cooked to powder. Attic temperatures in Hurst destroy the foam insulation on suction lines running through the roof cavity. We replace this on every changeout, not as an upsell, because an uninsulated line costs efficiency and can slug liquid back to the compressor.
- Electrical service barely adequate for modern SEER2 requirements. Many Hurst homes still have the original 100-amp panel and undersized disconnects. We flag this during the load calculation, handle the electrician coordination, and include it in the written scope so there’s no day-of surprise.
Pricing for AC Installation in Hurst, TX
We don’t do “starting at” pricing that doubles at the door. Here’s what we actually charge in the Hurst market:
| Service | Typical Range in Hurst |
|---|---|
| AC Installation | $3,500-$7,500 |
| Furnace Installation | $3,500-$7,500 |
| AC Repair | $150-$650 |
| Tune-Up | $80-$200 |
What moves you inside that range: SEER2 rating (14.3 minimum vs. 16+ for rebate eligibility), single-stage vs. variable-speed equipment, whether we need to replace or remediate ductwork, and if electrical or gas line upgrades are required. Every Hurst job gets a written, itemized price before work begins. No change orders unless you add scope. Estimates are free, and we don’t charge to explain why your current system is failing.
We Also Serve Cities Near Hurst
Our crews work AC Installation in Hurst regularly, and we cover the full Mid-Cities ring: North Richland Hills, Bedford, Colleyville, and Haltom City. Each has its own housing stock and code requirements, but the same Kingswell standards apply on every job. Dispatch is coordinated from our Dallas-Fort Worth office, with local routing that keeps our trucks in the Hurst-Bedford-North Richland Hills triangle most days.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Hurst
Yes, the City of Hurst requires a permit for HVAC system replacement, and we pull it as part of our standard process. Our team handles the application, scheduling, and inspector coordination; you don’t need to visit city hall. Call (817) 402-2972 and we’ll explain what’s included in your written estimate.
You can, but we don’t recommend it and we won’t warranty a mismatch. These homes have attic ductwork that’s likely degraded, and a new condenser sized to old tonnage inherits all the problems. We quote full system replacement with load calculation and duct inspection so you’re not paying twice. Estimates are free.
We measure every opening before we order equipment, and we stock compact cabinet dimensions from Rheem, York, and Bryant that fit Hurst’s restricted spaces. If we need to modify framing or build a new curb, it’s in the written price upfront, not a surprise on install day.
Yes, especially for garage conversions, additions, or slab ranches where running new duct would mean opening walls. Daikin mini-splits are efficient, quiet, and don’t require attic ductwork. We size them to the actual room load and handle the line-set routing with minimal drywall repair.
Most full AC installations in Hurst run $3,500-$7,500, including equipment, labor, and standard duct remediation. Higher SEER2 ratings, variable-speed systems, or extensive electrical upgrades move toward the top of that range. Call (817) 402-2972 for a free, exact quote based on your home’s load calculation.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Hurst and the Mid-Cities since 2003.