Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Lantana
Most full AC installations in Lantana run $3,500-$7,500 for a complete central system, and we schedule a load calculation and written estimate before any equipment gets ordered. If your current system is struggling through another humid Florida summer, call (817) 402-2972 and we’ll send a technician to measure your home, inspect your ductwork, and hand you a fixed price you can count on.
We’ve been working in Lantana long enough to know the difference between a standard inland install and what this coastal town actually needs. Our crews serve Lantana from our Miami-area dispatch office, and we carry the corrosion-resistant specs, coated coils, and electrical panel know-how that homes near the Intracoastal demand. Whether you’re off East Ocean Avenue with salt air coming off the waterway, in the residential streets near Lantana Municipal Beach, or closer to Hypoluxo Road, we understand the housing stock here: concrete block stucco homes built from the 1950s through the 1970s, many with original fiberglass duct board that has no business carrying a modern system’s airflow.
Why Coldharbour Heating & Air Is Lantana’s Preferred AC Installation Company
We’re independently owned and operated, part of the Kingswell network since 2003, and we hold ourselves to standards most HVAC companies won’t put in writing. Every AC Installation we perform in Lantana comes with a written price before work begins, a firm arrival window, and our 365-Day Done Right Promise: if anything we install fails within a full year, we come back and make it right at no charge.
Our technicians are background-checked, uniformed, and trained on nine major brands including Goodman, Rheem, and Daikin. They know Lantana’s specific challenges: the salt-air degradation that destroys bare copper coils in 5-7 years, the cramped attics with collapsing duct board, and the electrical panels that need upgrading before a modern system can safely connect. A live person answers our phones 24 hours a day, 7 days a week. No voicemail trees. No waiting until morning.
Central Air Conditioning Installation in Lantana
Central Air Conditioning Installation in Lantana is rarely a simple box swap. Most homes in this town were built during the mid-century boom with concrete block stucco construction, single-zone thermostats, and attic duct systems that were barely adequate when new. A modern high-efficiency condenser paired with failing 1960s fiberglass duct board will struggle from day one: the blower motor fights high static pressure, capacity never reaches the far bedrooms, and the equipment runs longer and harder than it should.
That’s why we start every central air job with a Manual J load calculation, a ductwork inspection, and an electrical panel assessment. The price for a complete central air installation in Lantana typically falls between $3,500 and $7,500, depending on system size, ductwork condition, and any electrical upgrades needed.
Load Calculation and Ductwork Assessment
We measure every room, check insulation levels, and calculate exactly how much cooling capacity your home needs. Oversizing is common in Lantana because old rules of thumb don’t account for modern building envelopes or the latent humidity load this coastal climate produces. We also test static pressure across your duct system. If the original fiberglass duct board is collapsing or leaking, we’ll tell you before we quote the job, not after the new unit is running.
Electrical Panel and Code Compliance
Many Lantana homes still have original electrical panels that can’t handle the inrush current of a modern variable-speed compressor. Our technicians evaluate your panel’s ampacity, breaker condition, and grounding before any installation begins. If an upgrade is needed, we include it in your written estimate so there are no surprises when the disconnect box gets wired.
Furnace Installation in Lantana
Furnace Installation in Lantana is less common than cooling work, but when those two or three cold nights arrive each winter, a reliable heat source matters. Most Lantana homeowners who need heating choose a heat pump or a gas furnace paired with their central air handler. A complete furnace installation in Lantana typically runs $3,500-$7,500, same as a full cooling system, since the work often shares components with the air conditioning side.
We size furnaces using the same Manual J calculations as cooling systems, and we pay special attention to the heat exchanger specifications for coastal environments. Salt air doesn’t stop corroding equipment just because the thermostat is set to heat.
Heat Pump vs. Gas Furnace
For most Lantana homes, we recommend a heat pump because it handles both heating and cooling through one outdoor condenser unit. In our climate, a properly sized heat pump provides efficient heat down to surprisingly low temperatures, and it eliminates the need for a separate gas furnace and flue. If you prefer gas heat, we install sealed-combustion furnaces that draw combustion air from outside, protecting the burner assembly from our humid, salt-laden outdoor air.
Coastal Corrosion Protection
Any furnace or heat pump we install near the Intracoastal gets the same corrosion-resistant treatment as our cooling-only systems: epoxy-coated coils, stainless steel hardware where specified, and protective measures for electrical contacts. The furnace cabinet itself sits indoors, but the outdoor condenser still faces the same salt-air exposure that defines HVAC work in Lantana.
Trusted Brands We Service in Lantana
Our technicians carry training certifications for Goodman, Rheem, York, and Daikin, plus five additional major brands. We stock common parts locally for faster turnaround, and we can source coated-coil condensers and corrosion-resistant specifications that aren’t always standard inventory at inland distributors. When you need a replacement system quickly, that local parts access matters. We won’t try to sell you a brand we can’t support with factory-authorized warranty service.
Common AC Installation Problems We See in Lantana Homes
- Collapsing fiberglass duct board in cramped attics: The original duct systems in 1950s-70s Lantana homes were never designed for modern airflow requirements. We find duct board that has delaminated, sagged, or developed gaps that leak conditioned air into the attic. A new condenser fighting that restriction will never deliver rated capacity.
- Bare-copper condenser coils destroyed by salt air: Standard condensers installed without corrosion protection fail prematurely within a quarter-mile of the Intracoastal. We specify epoxy-coated coils or factory-treated aluminum fins that resist the oxidation that turns copper fins into green dust.
- Single-zone systems in unbalanced floor plans: A single thermostat trying to cool a Florida room addition, a converted garage, and original bedrooms simultaneously will always leave someone uncomfortable. We address this with load-calculated zoning or targeted mini split solutions.
- Undersized electrical panels from the original construction: Modern 16-SEER2 and higher systems need more circuit capacity than 1960s panels were built to deliver. We evaluate and upgrade panels before installation, not as a change order after the fact.
Pricing for AC Installation in Lantana, FL
We believe you deserve a real number, not a teaser rate that balloons at the door. Here’s what AC work costs in Lantana:
| Service | Typical Range in Lantana |
|---|---|
| Central air conditioning installation (full system) | $3,500-$7,500 |
| Furnace installation | $3,500-$7,500 |
| Tune-up | $80-$200 |
| AC repair | $150-$650 |
Your exact price depends on system size, ductwork condition, electrical panel status, and whether we need to address zoning or add corrosion protection for a waterfront location. We provide a written, itemized estimate before any work begins, and that price does not change. Estimates are free. Call (817) 402-2972 to schedule.
We Also Serve Cities Near Lantana
Our AC Installation in Lantana crews also travel throughout South Florida, with regular service to Jacksonville, Miami, Tampa, and Orlando. Dispatch and scheduling for the Lantana area are coordinated from our Miami office, keeping response times short for Palm Beach County homeowners.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Lantana
A like-for-like swap ignores the ductwork, electrical, and zoning realities that have changed over 50-70 years. The new condenser runs at higher pressures and different airflow rates than the original equipment, so it fights against collapsing fiberglass duct board and single-zone layouts that were marginal even in the 1960s. We always perform a full load calculation and duct assessment first. Call (817) 402-2972 for a free evaluation.
Yes. Homes within a quarter-mile of the Intracoastal need epoxy-coated coils or factory-corrosion-resistant condensers as standard equipment, not an upgrade. Bare copper fins oxidize in 5-7 years here, dropping efficiency and eventually requiring replacement. We specify coastal-grade protection on every waterfront-adjacent install. The exact spec depends on your home’s distance from the waterway and exposure direction.
We inspect your panel’s ampacity, breaker condition, and grounding during the initial estimate. Many 1950s-70s panels cannot safely handle the inrush current of a modern variable-speed compressor. If an upgrade is needed, we include it in your written price before work begins, not as a surprise add-on after installation starts.
SEER2 uses stricter testing conditions that better reflect real-world operation in hot, humid climates like ours. The old SEER rating overstated efficiency for systems running against Lantana’s sustained latent load. A 16-SEER2 system will actually deliver closer to its rated efficiency here than an older 16-SEER unit would have. We explain the real operating costs during your estimate.
We size for latent capacity, not just temperature drop. That means proper load calculation, variable-speed equipment when appropriate, and duct systems that don’t leak conditioned air into the attic. The Intracoastal acts as a humidity pump that keeps indoor relative humidity elevated even overnight, so your system needs to remove moisture effectively, not just blast cold air. Call (817) 402-2972 and we’ll show you the difference in our load calculation report.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Lantana and South Florida since 2003.