Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Conyers
Most furnace repairs in Conyers run $150-$700 and our technicians can usually diagnose the problem within an hour. We keep common ignitors, blower motors, and gas valves stocked for the Goodman, Rheem, and York systems found throughout Conyers’s 1990s-2000s subdivisions, so we don’t leave you waiting on parts.
We’re the local face of the Kingswell Guarantee, independently owned and operated since 2003, and we’ve spent years working in the brick-veneer colonials and ranch homes that line Highway 138, Salem Road, and Old U.S. 278. Our dispatch team coordinates from the Atlanta office, but our crews live and work in the Conyers area. That means we know the difference between a furnace struggling with normal winter demand and one starving for return air because of the undersized ductwork that builders installed during the suburban boom. When your heat goes out and overnight lows drop into the teens, you need someone who understands your house, not just your thermostat. Call (817) 402-2972 and a live person will answer, 24 hours a day.
Why Coldharbour Heating & Air Is Conyers’s Preferred Furnace Repair Company
Conyers homeowners have long memories. They remember the company that quoted one price over the phone and doubled it at the door. We don’t work that way. Our Furnace Repair team hands you a written price before any tool comes out of the truck, and that number doesn’t change.
Our 365-Day Done Right Promise is written on every repair. If the same part fails within a full year, we come back and fix it at no charge. No argument, no runaround. The guarantee goes on paper before the technician leaves your driveway.
We answer the phone with a live person around the clock. Not a voicemail tree, not a callback promise, not an answering service that doesn’t know Conyers from Chattanooga. When you call at 11 p.m. because your furnace quit during a Piedmont ice storm, you reach someone who can dispatch a technician and give you a real arrival window.
Our technicians are background-checked, uniformed, and trained on nine major residential brands. They know the local housing stock: the crawl-space ductwork that traps moisture in red Georgia clay, the single-zone systems that can’t move enough air to second floors, the builder-grade heat exchangers that crack after two decades of restricted airflow. That’s not theoretical knowledge. It’s what we see on service calls every week.
Heat Pump Repair in Conyers
Heat Pump Repair in Conyers addresses the dual-fuel and all-electric systems that handle both heating and cooling in our humid subtropical climate. Because Conyers heat pumps run near-continuously for five-plus months each summer, then switch to heating mode through mild winters punctuated by ice storms, they accumulate wear faster than systems in cooler, drier regions. A typical heat pump repair in Conyers costs $150-$650, depending on whether the issue is electrical, mechanical, or refrigerant-related.
Reversing Valve and Defrost Board Failures
The reversing valve switches your heat pump between cooling and heating mode. In Conyers, where systems cycle between modes frequently during shoulder seasons, this valve can stick or leak. The defrost board controls the brief heating cycles that melt frost off the outdoor coil during cold, damp weather. When either component fails, you get lukewarm air in winter or no cooling in summer. We test both with manufacturer-specific procedures and replace only what’s actually failed.
Undersized Auxiliary Heat Elements
Many Conyers heat pumps were installed with backup electric heat strips sized by rule of thumb rather than real load calculation. When overnight lows hit the teens during a Piedmont ice storm, those undersized elements can’t keep up. The system runs continuously, the electric bill spikes, and the second floor stays cold. We measure the actual heat load and can recommend properly sized backup options or supplemental solutions.
Heating Repair in Conyers
Heating Repair in Conyers covers gas furnaces, heat pumps in heating mode, and dual-fuel systems. The work ranges from ignitor replacements and flame sensor cleanings to heat exchanger inspections and blower motor rebuilds. Most heating repairs in Conyers fall between $150-$700, with simpler electrical fixes at the lower end and heat exchanger or gas valve work toward the top.
Heat Exchanger Inspection and Safety
A cracked heat exchanger can leak carbon monoxide into your home. In Conyers’s older gas furnaces, restricted airflow from undersized returns causes the exchanger to overheat and fatigue prematurely. We inspect with a borescope camera, document our findings with photos you can see, and never use scare tactics to push a replacement you don’t need. If the exchanger is sound, we fix what’s actually broken.
Gas Valve and Ignitor Service
The gas valve controls fuel flow to the burners; the ignitor lights it. Both are common failure points in furnaces that have cycled on and off for twenty-plus winters. We carry replacement ignitors for Goodman, Rheem, and York systems on our trucks, and we test gas valve pressure with calibrated manometers to confirm safe operation before we leave.
Trusted Brands We Service in Conyers
Our technicians train continuously on Goodman, Rheem, York, and Daikin systems, plus Carrier, Trane, Lennox, Bryant, and American Standard. We stock common failure parts for the brands most frequently found in Conyers’s builder-era subdivisions, which means faster repairs without waiting for warehouse shipments. Goodman and Rheem furnaces dominate the 1990s-2000s tract homes along Salem Road and Old U.S. 278, so we keep ignitors, blower motors, and control boards for those models on hand. York systems appear frequently in the ranch homes near Highway 138. When you call, we ask your model number so the technician arrives with the right parts and the right knowledge.
Common Furnace Repair Problems We See in Conyers Homes
- High-limit switch trips from restricted airflow. The single-zone, undersized return-air pathways in Conyers’s two-story colonials can’t move enough CFM to keep the heat exchanger at safe temperatures. The furnace shuts down to protect itself, leaving you cold even though the burners work fine. We measure static pressure, identify the restriction, and fix the ductwork, not just the symptom.
- Heat exchanger cracking after decades of overheating. Builder-grade heat exchangers in 20-35-year-old gas furnaces along Highway 138 and Old U.S. 278 fatigue from years of running too hot. We inspect with a borescope and show you exactly what we find.
- Blower motor failure from crawl-space moisture. Conyers’s red-clay soil traps humidity under homes, and degraded flex duct insulation lets that moisture reach the evaporator coil and blower assembly. The motor works harder, runs hotter, and fails sooner. We check the whole system, not just the broken part.
- Auxiliary heat lockout during ice storms. Single-stage heat pumps with undersized backup elements can’t handle the load when Piedmont overnight lows drop into the teens. The system locks out auxiliary heat to prevent damage, and you’re left with a cold house and a high electric bill. We size the backup properly or recommend supplemental options.
Pricing for Furnace Repair in Conyers, GA
We believe you should know what you’re paying before anyone touches your system. Here’s what furnace and heat pump repairs typically cost in the Conyers market:
| Service | Typical Range in Conyers |
|---|---|
| Furnace Repair | $150-$700 |
| Heat Pump Repair | $150-$650 |
Most ignitor replacements fall in the $150-$280 range, parts and labor included. Blower motor repairs or replacements run higher, typically $300-$600 depending on whether it’s a direct-drive or variable-speed model. Heat exchanger work is at the top of the range and sometimes tips toward replacement if the furnace is past 20 years.
What moves the price? The part that’s failed, whether we can access it without extensive disassembly, and whether the root cause is a single component or a system-wide issue like restricted airflow. We give you a written price before any work begins, and that price does not change. Estimates are free. Call (817) 402-2972 to schedule.
We Also Serve Cities Near Conyers
Our Furnace Repair in Conyers crews also respond to calls in Snellville, Redan, Oxford, and Lilburn. The same Kingswell standards apply: written price first, firm arrival window, clean job site, and a 365-day written guarantee on every repair.
Serving Conyers, GA - Our Local Coverage Area
We’re based in the Conyers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Conyers
The undersized return-air ductwork installed during the suburban boom can’t move enough air across the heat exchanger, so it overheats and the safety switch shuts the system down. We measure static pressure, enlarge or reconfigure the return pathway, and verify the furnace runs a full cycle without tripping. Call (817) 402-2972 for a free diagnostic - estimates are free.
If your electric bill spikes dramatically during cold snaps and the second floor stays cold, your backup heat is likely undersized. We perform a real load calculation (not a rule-of-thumb estimate) and compare it to your installed element’s output. If there’s a mismatch, we’ll show you the numbers and discuss properly sized options. Call (817) 402-2972 to schedule an evaluation.
Check for moisture damage to flex duct insulation, which collapses and restricts airflow, and look for a clogged evaporator coil caused by years of crawl-space humidity. Both are common in Conyers’s red-clay crawl spaces and both cause the same symptom: the furnace runs too hot, too briefly. We inspect the full airflow path with cameras and pressure gauges. Call (817) 402-2972 - estimates are free.
If the heat exchanger is cracked or the repair exceeds roughly half the cost of a new system, replacement usually makes more sense. We inspect the exchanger with a borescope, assess overall condition, and give you honest numbers for both options. No pressure either way. Call (817) 402-2972 and we’ll walk you through it.
Static pressure measures how hard your blower works to move air through the duct system. In Conyers’s builder-era homes with undersized returns, it’s often 50% or more above manufacturer specifications. That extra strain overheats the heat exchanger, burns out blower motors, and leaves rooms uncomfortable. We measure it on every call because it tells us whether we’re fixing the real problem or just patching symptoms. Call (817) 402-2972 for a full system evaluation.
We got a call from a homeowner on Salem Road whose two-story colonial had a Carrier gas furnace short-cycling every few minutes; our tech found a badly clogged evaporator coil and a return-air duct that was undersized for the home’s tonnage, pushing static pressure well above the blower’s rating and tripping the high-limit switch. After cleaning the coil, opening up the return, and checking the heat exchanger with a borescope, the furnace ran a full heating cycle without tripping - and the homeowner finally got heat upstairs for the first time in two winters.
Conyers’s 1990s-2000s tract homes were built with single-zone heat pumps and undersized return-air pathways - the same builder shortcut that leaves second floors hot and stuffy all summer also starves gas furnaces of return air in winter, so techs here measure static pressure and often find a heat exchanger overheating because the return can’t move enough CFM. This pattern is so common in Conyers that we’ve developed a standard diagnostic protocol for it, and fixing the ductwork often costs less than replacing a furnace that was never actually broken.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Conyers and the greater Atlanta area since 2003.