Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Fort Lauderdale
Most furnace repairs in Fort Lauderdale run $150-$700 and our technicians usually arrive the same day you call. We dispatch from our Miami office and carry the parts to fix Goodman, Rheem, York, and Daikin units on the first trip.
We know Fort Lauderdale homes. The 1950s-1970s CBS ranches in Imperial Point, the canal-front properties in Rio Vista, the high-rise condos along A1A - each has its own furnace quirks, and we’ve worked on all of them. Our Furnace Repair team doesn’t guess. We test, we explain what we found, and we hand you a written price before any wrench turns. That’s The Kingswell Way. Call (817) 402-2972 and a live person picks up, 24 hours a day.
Why Coldharbour Heating & Air Is Fort Lauderdale’s Preferred Furnace Repair Company
We’ve been part of the Kingswell network since 2003, and our independently owned operation has built a reputation in Fort Lauderdale by doing what we say we’ll do. Homeowners here remember the company that showed up in the arrival window, not the one that left them waiting four hours with a “we’re on our way” text.
Our technicians are background-checked, uniformed, and trained on nine major brands. When you schedule Furnace Repair in Fort Lauderdale, you get a firm arrival window, a clean job site, and a written guarantee before we leave. The 365-Day Done Right Promise means if that repair fails within a full year, we come back and fix it at no charge. No argument. No re-diagnostic fee.
Phones are answered by a live person around the clock. Not a voicemail tree. Not an answering service that promises a callback. A real human who can dispatch a technician to your Fort Lauderdale neighborhood tonight if your furnace quits.
Gas Furnace Repair in Fort Lauderdale
Gas Furnace Repair in Fort Lauderdale means dealing with equipment that sits idle for months in our tropical heat, then gets asked to perform perfectly on the first cold snap in January. Most gas furnace repairs in Fort Lauderdale fall between $150-$700, depending on whether we’re replacing an ignitor, cleaning a flame sensor, or addressing a cracked heat exchanger.
Fort Lauderdale’s canal-front micro-environment is the hidden culprit behind many of the gas furnace failures we see. That salt-laden, canal-humidified air pulled through leaky returns attacks heat exchangers and burners from the inside out. A heat exchanger that would pass inspection at 15 years in Orlando can show rust scaling and cracks by year 7 here, especially in those original 1950s-1970s CBS homes with short, humid flue runs through the attic.
Heat Exchanger Inspection and Replacement
A cracked heat exchanger is a safety issue, not a suggestion. We use a borescope camera to inspect every seam, and if we find cracks or rust scaling from years of humid salt air, we show you the image and explain your options. Replacement is often the right call in Fort Lauderdale’s coastal environment, where continued corrosion makes patching a short-term fix at best.
Burner Cleaning and Gas Valve Service
Corroded burners soot up and burn inefficiently, sending carbon monoxide risk upward and your gas bill with it. We pull the burner assembly, clean every orifice, test gas pressure at the valve, and reassemble with fresh gaskets. The goal is clean, blue flame and proper combustion - especially important in older Fort Lauderdale homes where the original venting may already be marginal.
Furnace Tune Up in Fort Lauderdale
Furnace Tune Up in Fort Lauderdale costs $80-$200 and is the single best way to avoid a no-heat call on the one January night you actually need your system. We know - “barely use heat” is what every Fort Lauderdale homeowner says. But your furnace sits dormant through eight months of tropical humidity, and that dormancy is harder on the system than running it would be.
During a tune-up, we test every safety control, measure gas pressure, inspect the heat exchanger with a camera, check capacitor values on the blower and inducer, and verify your CO detectors are positioned correctly. We also look at the return air path for leaks that pull humid, salt-laden air from your attic or crawl - a common find in Imperial Point and Coral Ridge homes where original ductwork has settled and separated at the seams.
What Our Tune-Up Includes
Every tune-up produces a written report: gas pressure readings, temperature rise across the heat exchanger, blower amp draw, and photos of anything that needs attention. Our technicians are not paid on what they sell, so the recommendation to repair or replace comes from the data, not a commission sheet.
When to Schedule
October through early December is the smart window for Fort Lauderdale. Beat the first cold snap, beat the rush, and give us time to order parts if we find something worn. A capacitor that tests weak in October will fail in January. We’d rather find it early.
Trusted Brands We Service in Fort Lauderdale
Our trucks carry parts for Goodman, Rheem, and York systems, plus cross-references for Daikin and the other five brands we service. That matters in Fort Lauderdale, where a no-heat night can drop into the 40s and where waiting three days for a specialty ignitor is not an option. We also stock common blower motors, capacitors, and control boards for the package units and PTACs common in Fort Lauderdale’s 1960s-1980s condo buildings along A1A. Fast turnaround is standard, not an upgrade.
Common Furnace Repair Problems We See in Fort Lauderdale Homes
- Heat exchanger rust and cracking in canal-front neighborhoods. Salt-laden air from Fort Lauderdale’s 300-plus miles of inland canals pulls through leaky returns and attacks the heat exchanger from both sides. We see this in Imperial Point and Rio Vista homes where the original flue run is short and humid. The rust scaling builds fast.
- High-limit switch tripping from undersized ductwork. Original 1950s-1970s CBS homes were built with single-zone ductwork never designed for modern airflow requirements. Static pressure runs high, the heat exchanger overheats, and the safety switch shuts the system down. A new furnace without ductwork modification just repeats the cycle.
- Lightning-fried control boards after summer storms. Fort Lauderdale’s May-to-October thunderstorm pattern sends power surges through aging electrical panels. The same lightning strike that kills your AC control board in August can take out the furnace ignition module in January, when you finally try to use it.
- Blower motor and inducer capacitor failure after long idle periods. Capacitors degrade in heat and humidity, even when not in use. Eight months of Fort Lauderdale attic conditions can drop a capacitor below its rated microfarads, leaving you with a blower that hums but won’t turn or an inducer that can’t establish draft.
Pricing for Furnace Repair in Fort Lauderdale, FL
| Service | Price Range |
|---|---|
| Gas Furnace Repair | $150-$700 |
| Furnace Tune Up | $80-$200 |
What drives the number? Parts, mostly. An ignitor replacement runs toward the lower end. A heat exchanger replacement or full blower motor swap pushes toward the higher end. We always give you a written price before work begins, and that price does not change when we’re done. The Kingswell Way says the price is the price.
Every repair comes with our 365-Day Done Right Promise in writing. If the repair fails inside that year, we return and correct it at no charge. No re-diagnostic fee. No “parts only” limitation. The guarantee is on paper, not verbal, and it’s included on every job.
Call (817) 402-2972 for a free estimate. We’ll diagnose the system, explain what we found, and hand you a written price you can accept or decline with no pressure.
We Also Serve Cities Near Fort Lauderdale
Our crews work throughout Broward County, including Fort Lauderdale, Plantation, Pompano Beach, Hollywood, and Coconut Creek. Same written pricing, same 365-Day Done Right Promise, same live-answer phone coverage. Dispatch is coordinated from our Miami office, but the technician who arrives knows your neighborhood.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well, and we also offer our AC Repair in Fort Lauderdale. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Fort Lauderdale
Fort Lauderdale’s 300-plus miles of inland canals pull salt-laden, humid air deep into residential neighborhoods like Imperial Point and Rio Vista, and that air gets pulled through leaky returns directly across your heat exchanger. Orlando has humidity but not the salt corrosion; inland Florida has neither in the same concentration. The result is rust scaling and cracking by year 7 here versus 15 years inland. Call (817) 402-2972 for a free heat exchanger inspection - estimates are free.
No, not by itself. The hot and cold rooms are a ductwork and zoning problem, not a furnace problem. Your original single-zone system was designed for a different era of comfort expectations. A new furnace matched to that same undersized ductwork will actually make things worse - higher static pressure, more high-limit trips, and a cracked heat exchanger within a few seasons. We assess airflow, static pressure, and duct capacity before recommending any replacement. Call (817) 402-2972 for a proper load calculation.
Yes, especially here. Long idle periods in tropical humidity degrade capacitors, corrode electrical connections, and let dust and salt settle on burners. The “barely use it” homeowner is the one who gets surprised on the first cold night. Our $80-$200 tune-up catches the degraded capacitor, the weak ignitor, the CO risk before you need the system. Call (817) 402-2972 to schedule before the January rush.
The high-limit switch is doing its job: shutting down the furnace before the heat exchanger overheats and cracks. In Fort Lauderdale’s older CBS homes, the cause is almost always restricted airflow from undersized original ductwork or a clogged filter that hasn’t been changed because “we barely use heat.” We measure static pressure and temperature rise to find the root cause. A new high-limit switch without fixing the airflow just buys you weeks. Call (817) 402-2972 for diagnosis.
Absolutely. Fort Lauderdale’s May-to-October thunderstorm pattern produces power surges that travel through your electrical panel and attack any connected control board. The damage often sits latent - the board works erratically, then fails completely when you first call for heat in January. We test boards for voltage tolerance and recommend whole-home surge protection for homes with a history of lightning damage. Call (817) 402-2972 if your furnace is acting up after a storm.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Fort Lauderdale since 2003.







Before
After
Before
After
Before
After