Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Naples
Furnace repair in Naples typically runs $150-$700, and our Furnace Repair team can usually diagnose the problem and quote a fixed price within an hour of arrival. We dispatch from our Miami office and keep technicians routed through Collier County daily, so most Naples calls get same-day or next-morning service. Call (817) 402-2972 any time, day or night, and a live person picks up. No voicemail trees, no “leave a message and we’ll call back.”
We’ve been serving seasonal residents and year-round Naples homeowners since 2003. We know the difference between a true heating failure and what looks like one: a blower motor seized from five months of stagnant air, a mold-choked evaporator coil blocking airflow, or a salt-corroded condenser coil on a heat-pump system that’s forcing the gas furnace to carry the whole load. In Naples, the furnace is often the symptom, not the disease.
Why Coldharbour Heating & Air Is Naples’s Preferred Furnace Repair Company
We’re independently owned and operated under the Kingswell Guarantee, and we’ve built our reputation in Naples on four written promises that most competitors won’t put on paper: a price before the work starts, a firm arrival window, a clean job site, and our 365-Day Done Right Promise. If a repair fails within a full year, we come back and correct it at no charge. That guarantee is written down before our technician leaves, every single time.
Our technicians are background-checked, uniformed, and trained on nine major residential brands including Goodman, Rheem, and York. They carry common furnace parts for these brands on their trucks, which means fewer return trips and faster fixes for Naples homeowners. We don’t pay our techs commission on what they sell, so there’s no incentive to recommend a part you don’t need.
Phones are answered by a live person 24 hours a day, 7 days a week. When your furnace quits on a January morning and you’re home all day, waiting matters. We get that. Our dispatch team coordinates from Miami but routes technicians specifically through Naples, Bonita Springs, and Marco Island, so we’re never far.
Furnace Tune Up in Naples
A Furnace Tune Up in Naples is different from up north. Here, the furnace shares an air handler with your cooling system, and that air handler sits idle for five to six months every summer while seasonal homes go dark. We focus our tune-ups on what fails after that dormancy: blower motors drawing high amps, run capacitors swollen from heat, evaporator coils matted with biological growth, and UV systems that tripped offline and never got reset.
Our tune-up runs $80-$200, flat price, and includes a written report of everything we found. Most Naples homeowners need this done in October, before the first cold front, or in late March before they head north for the summer. Year-round residents in communities like Pelican Bay or along Crayton Road often schedule twice-yearly visits to keep both the heating and cooling sides clean.
What the Tune-Up Covers
We pull and inspect the blower assembly, measure amp draw against manufacturer spec, check the heat exchanger with a borescope camera for cracks or corrosion, test the ignitor for proper resistance, verify gas pressure at the valve, and clean the flame sensor. We also inspect the evaporator coil above the furnace, because in Naples that’s where the real problems hide. A dirty coil restricts airflow and forces the blower motor to overwork, which shows up as a “furnace problem” when it’s actually a summer-mold problem.
Seasonal Shutdown Preparation
For snowbird clients, we offer a formal shutdown service: we clean the system, set the thermostat to a programmed schedule that runs the fan periodically, and can arrange quarterly check-ins. It’s cheaper than an October emergency call. We’ve learned that a stagnant air handler at 80°F+ for five months is a mold incubator. Running the fan 15 minutes every other day prevents that.
Emergency Furnace Repair in Naples
Emergency Furnace Repair in Naples means a technician at your door when the overnight low drops below 50°F and your system won’t fire. For retirees and 55+ residents who are home all day, a cold house isn’t uncomfortable, it’s a health risk. We answer emergency calls 24/7, and we don’t charge overtime rates. The price is the price, whether we arrive at 2 PM or 2 AM.
Our emergency calls in Naples spike predictably every October. Snowbirds return from Michigan, Ohio, and New York to find their furnace won’t start. Often the furnace itself is fine, the heat exchanger is intact, the gas valve opens, but the blower motor seized or the evaporator coil is so choked with mold that the high-limit switch keeps tripping. We diagnose the root cause, not just the symptom.
No-Overtime Pricing
Our written price is handed to you before any work begins. That’s The Kingswell Way. On an emergency call, that means no sticker shock at the door, no “after-hours surcharge” added while you’re cold and vulnerable. The technician explains what’s wrong, shows you the fixed price, and you sign off before a single tool comes out.
What Counts as an Emergency
No heat at all. A gas smell near the furnace. A loud bang followed by silence. The carbon monoxide detector chirping. Any of these, call us immediately. For suspected gas leaks, we also advise calling your utility’s emergency line, then call us to repair the furnace once the gas is shut off and cleared. Safety first. We don’t give DIY instructions for gas valves or heat exchangers; the risk is too high.
Trusted Brands We Service in Naples
Our technicians carry training certifications and common parts for Goodman, Rheem, and York systems, plus six other major brands. For Naples’s large estate homes in Grey Oaks and Quail West, we also stock components for Carrier and Trane communicating systems and multi-zone VRF setups. We maintain relationships with local distributors in Collier County, so if we don’t have a part on the truck, we can usually source it same-day rather than waiting on a warehouse in Orlando. That matters when you’re back for two weeks and the furnace quits on night three.
Common Furnace Repair Problems We See in Naples Homes
- October “no heat” calls from snowbird returns: The furnace fires but blows cold air, or the blower never starts at all. We trace this to a mold-choked evaporator coil or a blower motor that seized from months of stagnation. The fix is cleaning or replacement, plus a plan to prevent recurrence next summer.
- Heat-pump condenser coil failure forcing gas furnace overload: West of US-41, salt air destroys standard aluminum-fin coils in 3-4 years. When the heat pump’s coil fails, the defrost cycle quits, and the gas furnace runs constantly trying to keep up. Homeowners think they need furnace repair; they actually need a coastal-grade condenser replacement.
- Ignition lockouts on multi-zone estate systems: In Pelican Bay and Tiburón, a failed zone board or miscalibrated thermostat throws a fault code that reads like a control-board failure. A standard tech replaces the board; the real fix is re-commissioning the zone dampers and recalibrating the communicating thermostat.
- High-limit switch tripping from restricted airflow: The switch is doing its job, shutting down the furnace before it overheats. The cause is usually a dirty filter left in place for two seasons, or a collapsed return duct in the attic. In Naples’s older concrete-block homes near Old Naples, we also see blocked returns from renovations that never got properly reconnected.
Pricing for Furnace Repair in Naples, FL
Most furnace repairs in Naples fall between $150 and $700, parts and labor included. A simple ignitor replacement runs toward the lower end. A blower motor or gas valve replacement sits in the middle. Multi-zone control-board issues or heat-exchanger work push toward the higher end. We give you a written, fixed price before any work begins. That price doesn’t change at the door, no matter what we find once we’re inside the cabinet.
| Service | Price Range in Naples |
|---|---|
| Furnace Repair | $150-$700 |
| Furnace Tune Up | $80-$200 |
What affects your specific cost: the age of the system, whether parts are still manufactured for that model, accessibility (attic air handlers in Naples’s older homes take longer to reach), and whether the real problem is the furnace or a connected component like the evaporator coil or heat pump. We offer free estimates. Call (817) 402-2972 and we’ll give you a straight answer over the phone if we can, or schedule a diagnostic visit if we need to see the system.
We Also Serve Cities Near Naples
Our technicians route through Collier and southern Lee counties daily. If you’re in Naples proper, Bonita Springs, Marco Island, Estero, or Fort Myers Beach, we can get to you. Dispatch is coordinated from our Miami office, but the crew that serves your neighborhood lives locally and knows the roads, the building styles, and the specific HVAC failures each area sees.
Serving Naples, FL - Our Local Coverage Area
We’re based in the Naples area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Naples
The furnace itself probably isn’t broken. Five months at 80°F+ with no airflow turns the shared air handler and evaporator coil into a mold incubator. The blower motor seizes or draws high amps, the coil blocks airflow, and the high-limit switch keeps shutting the system down. We clean or replace what’s actually failed, then set up a seasonal monitoring plan so it doesn’t happen next year. Call (817) 402-2972 for a free estimate.
Yes. The salt-laden Gulf breeze corrodes standard aluminum fins visibly within 3-4 years. On a hybrid heat-pump system, that failed coil kills the defrost cycle and forces your gas furnace to carry the entire heating load. Experienced Naples technicians quote e-coated coastal-grade coils as the baseline, not an upgrade. If someone sold you a standard unit to save money, you’ll likely call us within a warranty cycle. Call (817) 402-2972 and we’ll inspect what you have.
Yes. Our technicians are trained on Carrier, Trane, and Daikin multi-zone and VRF systems. A failed zone board or uncalibrated thermostat often throws an ignition lockout code that looks like a control-board failure. We diagnose the actual fault, replace or recalibrate what’s needed, and re-commission the system so all zones work together. Call (817) 402-2972 to schedule.
Most repairs run $150-$700, with a written fixed price given before any work begins. Simple ignitor replacements are at the low end. Blower motors, gas valves, and heat-exchanger work range higher. We don’t charge diagnostic fees if you proceed with the repair. Call (817) 402-2972 for an exact quote on your system, estimates are free.
Yes. We offer a formal seasonal shutdown and monitoring program: pre-departure cleaning, a programmed fan schedule to keep air moving through summer, and quarterly check-ins. It’s far less expensive than an emergency call when you return. We got the October call from a Pelican Bay owner who’d been back from Michigan for two days and couldn’t get her Carrier gas furnace to fire; the heat exchanger and burners were fine, but the evaporator coil sitting above it was matted with biological growth and the blower motor was drawing high amps at a static pressure well over 1.0 in. w.c. We pulled and cleaned the coil, replaced the blower motor and a swollen run capacitor, re-commissioned the system, and put the air handler on a seasonal monitoring schedule so it wouldn’t sit stagnant again next summer. Call (817) 402-2972 to set yours up.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Naples since 2003.







Before
After
Before
After
Before
After