Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Olympia Heights
Most furnace repair calls in Olympia Heights run $150-$700, and our technicians can usually be on-site the same day you call. We’re familiar with the 1950s-70s CBS ranch homes that dominate this unincorporated Miami-Dade neighborhood, and we know that when your heat quits on a 45°F January morning, you need a tech who understands whether your system is a heat pump, a propane furnace, or an electric air handler with heat strips. Call (817) 402-2972 any time, day or night. A live person answers the phone 24 hours a day, 7 days a week, and we’ll give you a firm arrival window before we head your way.
Our dispatch and scheduling are coordinated from our Miami office, but our crews serve Olympia Heights directly. We don’t ask you to wait through voicemail trees or call-back queues. When you call, we ask the right questions about your system’s behavior, your home’s construction, and what you’ve noticed, so the technician who arrives has the parts and knowledge to fix it in one visit when possible.
Why Coldharbour Heating & Air Is Olympia Heights’s Preferred Furnace Repair Company
Olympia Heights homeowners have been calling us since 2003 because we put everything in writing before the work starts. The Kingswell Way means four promises on every job: a written price before any tool comes out, a firm arrival window, a clean job site, and a 365-Day Done Right Promise on every repair. If a repair fails within a full year, we come back and correct it at no charge. That guarantee is written down, not verbal, and the technician leaves a copy with you.
We know the specific headaches of heating in this neighborhood. Most of Olympia Heights sits outside natural-gas mains, so the “furnace” we’re repairing is often a heat pump’s reversing valve, a propane unit’s ignition system, or heat strips in an electric air handler. Our technicians are trained on nine major HVAC brands including Goodman, Rheem, and York, and we stock common parts so we’re not ordering and making you wait.
Response time matters when your heat is out and the temperature is dropping. We route technicians from our Miami-area dispatch directly to Olympia Heights, typically arriving within the same day for non-emergency calls and faster for true no-heat situations. We’ve replaced sequencers on low-slope CBS ranches off SW 56th Street, diagnosed defrost-board faults on heat pumps near Miller Drive, and cleared propane flame-sensor corrosion on rural properties west of the main neighborhood.
Every technician is background-checked and uniformed. You know who’s walking through your door, and you know what the work costs before it begins.
Heating Repair in Olympia Heights
Heating Repair in Olympia Heights means understanding systems that rarely run from May through November and then get pushed hard for a few winter weeks. Most homes here heat with heat pumps, electric heat strips, or propane units, not natural-gas furnaces, so our diagnostic process starts with identifying your actual heat source and how it’s failing.
Our Furnace Repair team handles everything from no-heat emergencies to systems that run but can’t keep up on cold mornings. A typical Heating Repair in Olympia Heights costs $150-$700 depending on the component and accessibility. Heat-strip sequencers in unconditioned attics, propane ignition faults after summer layup, and reversing valves stuck in cooling mode are the three failures we see most often.
Heat-Strip and Sequencer Failures
The concrete-block ranch homes built across Olympia Heights in the 1960s and 1970s have unconditioned attic cavities that hit 150°F+ in summer. That heat degrades flex duct insulation and cooks the electrical components in electric furnaces and air handlers. We regularly find sequencers with welded contacts or heat elements with broken coils, both caused by years of thermal cycling in extreme attic temperatures. The repair means replacing the failed component, but we also check static pressure to see if undersized returns are making the problem worse.
Propane Furnace Ignition and Burner Issues
On properties outside the natural-gas mains, propane furnaces sit idle for eight or nine months, then fire up in January. Ignitors crack from thermal stress, flame sensors coat with oxidation, and burner orifices can clog with spider webs or dust. We clean, test, and replace these components, then verify gas pressure and combustion safety before we leave.
Boiler Repair in Olympia Heights
Boiler Repair in Olympia Heights is less common than heat-pump or electric heat-strip work, but the homes and small commercial buildings that do use hydronic heating need technicians who understand low-mass boilers, circulating pumps, and expansion tanks in a subtropical climate. Most boiler calls here involve systems that have been neglected through long cooling seasons and then fail to maintain pressure or temperature when finally needed.
A typical Boiler Repair in Olympia Heights runs $150-$700, same as our other heating repairs. The price depends on whether we’re replacing a failed circulating pump, addressing a leaking zone valve, or re-pressurizing a system that has slowly lost water through a pinhole leak in the loop. We always test combustion efficiency and check for carbon monoxide after any burner-related repair.
Circulating Pump and Zone Valve Failures
Boilers in Olympia Heights often serve small commercial spaces or older residential additions. When a circulating pump seizes or a zone valve actuator fails, one part of the building heats while another goes cold. We diagnose the electrical control signal, test the pump amp draw, and replace only the component that has actually failed rather than quoting unnecessary work.
Expansion Tank and Pressure Relief Issues
Subtropical temperature swings stress boiler expansion tanks. A waterlogged tank or stuck pressure-relief valve can cause the system to over-pressurize and dump water, or under-pressurize and trigger low-pressure lockouts. We test tank pre-charge, replace failed relief valves, and re-commission the system to proper operating pressure.
Trusted Brands We Service in Olympia Heights
Our technicians train continuously on Goodman, Rheem, York, and Daikin equipment, plus Carrier, Trane, Lennox, Bryant, and American Standard. We carry common ignitors, flame sensors, sequencers, contactors, and capacitors on our trucks, and our Miami-area parts coordination means we can source less-common components quickly without making you wait days. Because Olympia Heights requires Miami-Dade NOA-listed equipment for any replacement, we verify product approval before we spec new components, not after. That saves you from permit holds that can block a home sale.
Common Furnace Repair Problems We See in Olympia Heights Homes
- Heat-strip sequencer failure in 150°F+ attics. The unconditioned attic cavities of Olympia Heights’s 1950s-70s CBS ranches destroy electrical components. Sequencers weld shut or fail to stage heat elements properly, causing either no heat or dangerously high current draw. We replace the sequencer and check whether undersized returns are forcing the system to work harder than designed.
- Propane ignition faults after summer layup. Propane furnaces on rural properties outside the gas mains sit unused for months. Ignitors crack, flame sensors oxidize, and spiders clog burner orifices. The first cold snap exposes every weakness. We clean, test, and replace components, then verify combustion safety.
- Heat pump reversing valves stuck in cooling mode. Olympia Heights heat pumps run cooling 10 months a year. The reversing valve that switches to heating mode can seize or leak internally, leaving you with cold air in January. We diagnose valve position, test coil voltage, and replace the valve or the entire outdoor unit depending on age and refrigerant type.
- Defrost board failures on rarely-used heating cycles. Heat pumps need periodic defrost cycles to clear ice from the outdoor coil in heating mode. Defrost boards in Olympia Heights often fail because they’re only active a few weeks per year, and homeowners don’t notice until the coil ices over completely and the system shuts down on high pressure.
Pricing for Furnace Repair in Olympia Heights, FL
We give you a written price before any work begins. That price does not change when the technician is at your door. Here’s what furnace and heating repair typically costs in Olympia Heights:
| Service | Typical Range in Olympia Heights |
|---|---|
| Furnace Repair | $150-$700 |
| Heating Repair | $150-$700 |
| Boiler Repair | $150-$700 |
Where you land in that range depends on the component, accessibility, and whether we find contributing problems like restricted airflow from original 1960s duct design. A simple ignitor replacement on an accessible propane furnace runs toward the lower end. A heat-strip package replacement in a tight attic with deteriorated flex duct runs higher. We explain what we found, show you the options, and write the price down before we start. Estimates are free. Call (817) 402-2972 to schedule.
We Also Serve Cities Near Olympia Heights
Our Olympia Heights coverage extends throughout South Florida, and we also dispatch technicians to Jacksonville, Miami, Tampa, and Orlando. Whether you’re in a concrete-block ranch near Miller Drive or a rural property west of the neighborhood with a propane tank and a workshop outbuilding, we route the right technician with the right parts.
Serving Olympia Heights, FL - Our Local Coverage Area
We’re based in the Olympia Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Olympia Heights
Most Olympia Heights homes don’t have a natural-gas furnace. If you’re in one of the 1950s-70s CBS ranches that dominate the neighborhood, your heating is likely a heat pump with a reversing valve, an electric air handler with heat strips, or a propane-fired unit if you’re on a rural property outside the gas mains. We determine your actual heat source in the first five minutes of a service call. Call (817) 402-2972 and we’ll walk through what you’re seeing.
Heat pumps lose efficiency as outdoor temperature drops, and at 45°F they’re running near the balance point where auxiliary heat should kick in. If your auxiliary heat isn’t staging properly, usually because of a failed sequencer or a thermostat calibration issue, the heat pump struggles alone. Olympia Heights’s lack of coastal breeze moderation means those cold mornings feel colder than the thermometer suggests. We test heat-pump performance and auxiliary staging on every winter service call.
Any replacement heating section or complete system change in Olympia Heights must use Miami-Dade NOA-listed equipment, because the entire city is unincorporated Miami-Dade County. Equipment legal in Broward or Monroe can trigger a permit hold here. We verify NOA status before we spec any replacement, not after. This is standard on every job we do in Olympia Heights.
For a small workshop or detached garage in Olympia Heights, a ductless mini split is usually the better choice. Mini splits heat and cool, run on electricity (no propane tank to refill), and don’t require ductwork. A propane furnace makes sense only if you already have bulk propane on the property and need serious BTU output for a large space. We size either option to the actual load, accounting for the exposed, unshaded conditions common on rural Olympia Heights lots.
Most furnace and heating repairs in Olympia Heights fall between $150 and $700, with simple ignitor or flame-sensor replacements at the lower end and heat-strip package or reversing-valve replacements toward the higher end. We give you a written, fixed price before any work begins, and that price includes our 365-Day Done Right Promise. Call (817) 402-2972 for a free estimate.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Olympia Heights and South Florida since 2003.







Before
After
Before
After
Before
After