Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Schertz
Most furnace repairs in Schertz run $150-$700 and our technicians carry the parts to finish the job same day. If your heat is out, call (817) 402-2972 and a live person will answer, 24 hours a day, even on holidays.
We’ve been dispatching crews to Schertz from our San Antonio office since Coldharbour joined the Kingswell network in 2003. That means we know the difference between a no-heat call in Kensington Ranch and one out past Lower Seguin Road where the city gas lines stop and propane tanks start. Schertz’s rapid growth built whole neighborhoods in a decade, and those builder-grade systems installed during the 2003-2015 boom are now hitting the age where heat exchangers crack, igniters fail, and blower motors burn out from years of constant cycling. Whether you’re in a tract home off FM 3009 or on acreage east of town with a propane furnace and a wind-exposed slab, we show up in the window we give you and hand you a written price before any tool comes out of the truck.
Why Coldharbour Heating & Air Is Schertz’s Preferred Furnace Repair Company
Schertz homeowners call us back because we put the guarantee in writing. Every repair carries the 365-Day Done Right Promise: if the fix fails within a full year, we return and correct it at no charge. That promise is printed on the invoice before our technician leaves your driveway.
Our response time to Schertz averages under two hours for no-heat emergencies during standard dispatch hours. We know the local roads, the school traffic patterns around Schertz Parkway, and which rural properties sit beyond the natural gas boundary where propane service requires different orifice sizing and combustion testing.
Victor Mancini built Coldharbour on The Kingswell Way: say the price before the work starts, show up in the window promised, leave the home cleaner than we found it, put the guarantee in writing, and come back if it fails. No voicemail trees. No price jumps at the door. No arguments if something goes wrong.
Our technicians are background-checked, uniformed, and trained to service nine major residential HVAC brands including Goodman, Rheem, and York. We stock common furnace parts for Schertz’s most prevalent systems so you’re not waiting days for a heat exchanger or igniter to arrive.
Gas Furnace Repair in Schertz
Gas Furnace Repair in Schertz covers everything from failed igniters and cracked heat exchangers to gas valve replacements and blower motor rebuilds. Most Schertz homeowners need this service when the thermostat clicks but nothing fires, when the burners short-cycle, or when carbon monoxide detectors trip. Our diagnostic and repair work runs $150-$700, parts and labor included, and we always deliver a written price before starting.
Heat Exchanger and Combustion Safety
A cracked heat exchanger is the repair we take most seriously. In Schertz, the February 2021 Uri freeze pushed many systems past their design limits, and we’re still finding hairline cracks in units that survived the storm but deteriorated from thermal shock. We test every heat exchanger with a combustion analyzer and camera inspection. If it’s compromised, we explain exactly why replacement is non-negotiable and quote the full repair before proceeding.
Igniter and Gas Valve Replacement
Hot-surface igniters fail predictably after 3-5 years of seasonal cycling. Most igniter replacements in Schertz run $150-$280. Gas valve failures are less common but more urgent; a valve stuck partially open risks raw fuel accumulation. We test manifold pressure, verify regulator function, and never leave a system firing outside manufacturer spec.
Furnace Tune Up in Schertz
Furnace Tune Up in Schertz is preventive maintenance that catches problems before they become midnight emergencies. We recommend one every fall, before the first cold front pushes through from the Hill Country. A tune-up runs $80-$200 and includes a complete combustion analysis, electrical testing, and written report of what we found. Our technicians are not paid commission on what they sell, so the recommendations you get are based on what your system actually needs.
What the Visit Includes
We pull and inspect the burners, measure temperature rise across the heat exchanger, test amp draw on the blower motor, and check all safety limits. In Schertz’s hard-water zone, we pay special attention to humidifier pads and condensate components where scale buildup triggers false shutdowns.
The Kingswell Way Written Report
You get a checklist showing every test performed and its result. If something’s wearing toward failure, we flag it with a timeline. No pressure, no vague warnings. Just facts you can use to budget for next season or address now.
Trusted Brands We Service in Schertz
Our trucks carry parts for Goodman, Rheem, and York systems, the three brands we encounter most frequently in Schertz’s 2000s-era subdivisions. We also service Carrier, Trane, Lennox, Daikin, Bryant, and American Standard. Because Schertz’s builder-grade installations were often spec’d to minimum efficiency standards, we stock upgraded components that improve reliability without requiring full system replacement. Local parts availability means most repairs finish in a single visit, not a return trip next week.
Common Furnace Repair Problems We See in Schertz Homes
- Propane heat exchanger failures on rural properties. East of Schertz city limits, where natural gas doesn’t run, propane furnaces suffer premature heat exchanger cracking when tank pressure drops below optimal levels. Uneven firing creates hot spots that warp metal over time.
- Float-switch shutdowns from hard-water scale. The Schertz-Seguin water supply leaves mineral deposits in condensate lines and humidifier pads. A clogged drain triggers the safety float, killing power to the furnace control board and producing a confusing no-heat symptom.
- Blower motor burnout from undersized systems. Open-plan tract homes in Crossvine and Fairhaven with 10-foot ceilings push builder-grade furnaces beyond their rated airflow capacity. The blower runs longer, hotter, and eventually seizes.
- Uri freeze damage in “newer” homes. Systems installed 2008-2015 rarely saw sub-30°F operation before February 2021. Heat exchangers and refrigerant lines cracked from expansion stress, and we’re still discovering latent damage in homes where the furnace “worked fine last year.”
Pricing for Furnace Repair in Schertz, TX
We believe you deserve a real number before you commit, not a lowball that doubles at the door.
| Service | Price Range in Schertz |
|---|---|
| Furnace Repair (diagnostic + repair) | $150-$700 |
| Furnace Tune Up | $80-$200 |
What moves a repair toward the higher end: heat exchanger replacement, multiple failed components discovered during diagnosis, or propane systems requiring combustion re-analysis and orifice resizing. What keeps it lower: straightforward igniter swaps, limit switch replacements, or blower capacitor failures. Every quote is written and fixed. If we find something additional during the repair, we stop and explain before proceeding. Estimates are free. Call (817) 402-2972 to schedule.
We Also Serve Cities Near Schertz
Our Furnace Repair in Schertz coverage extends to Universal City, Cibolo, Converse, and Marion. Dispatch and scheduling are coordinated from our San Antonio office, with crews serving these communities from the same stocked trucks. If you’re unsure whether your address falls in our service area, call and we’ll confirm while you’re on the line.
Serving Schertz, TX - Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Schertz
Yes. We regularly service propane-fired furnaces on properties east of Lower Seguin Road and other rural areas where city gas doesn’t reach. Propane combustion requires different orifice sizing, manifold pressure settings, and draft verification than natural gas. Our technicians carry the tools to test and adjust for proper propane firing at your home’s specific elevation. Call (817) 402-2972 for a free estimate.
Hard water from the Schertz-Seguin supply leaves scale in condensate lines and humidifier pads, eventually clogging the drain path. The float switch kills power to prevent water overflow, but the symptom looks like a furnace failure. A thorough cleaning of the condensate system and humidifier component usually resolves it. If your home has a 2000s-era installation with flat-run drain lines, we may recommend re-pitching for better gravity flow.
Signs include rooms that never reach set temperature, a blower that runs constantly, and short cycling where the furnace fires for two minutes then shuts off. Many Schertz tract homes built 2003-2015 have open plans and high ceilings that exceed the original load calculation. We perform a Manual J heat-loss calculation to determine whether your system was properly spec’d. If it’s undersized, we’ll explain your options for correction or replacement with proper sizing.
A first service after 15+ years typically reveals significant wear: cracked heat exchanger from Uri thermal stress, corroded burners from condensation, and blower motors drawing excess amps. We inspect everything and give you a prioritized list. Some items are immediate safety concerns; others are maintenance that improves efficiency and extends remaining life. The visit runs $80-$200 for the tune-up, with any repairs quoted separately in writing before work begins.
Yes. We regularly drive to properties on acreage east and north of Schertz where propane tanks, outbuilding heaters, and wind-exposed slabs create different heating challenges than in-town tract homes. Response time may be slightly longer for remote locations, but we commit to a firm arrival window and call when we’re en route. Call (817) 402-2972 to schedule.
Our Furnace Repair team is standing by. Whether you’re in a Kensington Ranch subdivision home with a failing builder-grade unit or on rural acreage with a propane furnace that won’t fire, we’ll give you a written price, a firm arrival window, and a guarantee that lasts 365 days. Call Coldharbour Heating & Air at (817) 402-2972 for your free estimate.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Schertz since 2003.