Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Seattle
Most furnace repair calls in Seattle run between $175 and $825, and our technicians carry parts for nine major brands so we can usually finish the job in a single visit. If your furnace quit on a January morning in Ballard or your blower motor’s rattling through a Wallingford night, we’ll get a uniformed technician to your door with a written price before any work starts. Call us at (817) 402-2972. We dispatch and schedule from our Seattle office, and we know the difference between a quick ignitor swap on a 1990s Rheem and the full retrofit a 1920s Craftsman in Fremont actually needs.
Why Coldharbour Heating & Air Is Seattle’s Preferred Furnace Repair Company
We’ve been working on Seattle’s heating systems since 2003, and we’ve learned that this city’s housing stock doesn’t forgive guesswork. Our technicians are background-checked, uniformed, and trained to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment. When we say we’ll arrive between 8 and 10 a.m., we mean it. That’s The Kingswell Way.
Our 365-Day Done Right Promise means every repair comes with a written guarantee. If the same part fails within a full year, we come back and fix it at no charge. No argument, no additional invoice. We’ve issued that guarantee on every repair we’ve done in Seattle since we opened here.
A live person answers our phones 24 hours a day, 7 days a week. No voicemail trees, no “press 1 for emergencies” at 2 a.m. when your heat pump’s blowing cold air into a Queen Anne bedroom.
We know Seattle’s neighborhoods because we drive them daily. The steep streets of Capitol Hill, the narrow lots of Ballard, the converted basements of Wallingford. Each comes with its own heating puzzle, and we’ve solved most of them before.
Heat Pump Repair in Seattle
Heat Pump Repair in Seattle covers both the heating cycle and the cooling cycle of a ductless mini-split or central heat pump system. Because Seattle’s marine climate keeps winters mild and damp, heat pumps run longer heating cycles here than in colder inland cities, which puts steady wear on the reversing valve, outdoor coil, and compressor. Most heat pump repairs in Seattle fall within our standard $175-$825 range, though jobs requiring refrigerant work or compressor replacement can reach the higher end.
Reversing Valve Failures
The reversing valve switches your heat pump between heating and cooling mode. In Seattle’s climate, it cycles thousands of times per year, and the valve’s solenoid can stick or leak refrigerant. We test valve operation with gauges, replace the coil if it’s burned out, and recharge the system to factory spec.
Defrost Board and Sensor Issues
Seattle’s wet winters coat outdoor coils with frost. The defrost board should trigger periodic thaw cycles, but failed sensors or bad relays can leave ice buildup that blocks airflow and trips high-pressure switches. We replace defrost sensors and test the full sequence before we leave.
Heating Repair in Seattle
Heating Repair in Seattle means fixing any system that warms your home, whether it’s a gas furnace, electric heat pump, or the remaining oil-fired units still running in older neighborhoods. Most heating repair calls here involve ignition failures, blower motor problems, or safety switch trips, and we complete the majority same-day because our trucks carry replacement ignitors, flame sensors, and blower capacitors for Rheem, York, Bryant, and Daikin systems. Expect $175-$825 for most repairs.
Ignitor and Flame Sensor Replacement
A hot-surface ignitor glows white-hot to light the gas, then the flame sensor confirms ignition and keeps the gas valve open. When either fails, the furnace lights briefly or not at all. We test both with a multimeter, replace the failed component, and verify flame rectification before we pack up.
Blower Motor and Capacitor Repair
The blower motor pushes heated air through your ducts. A failed capacitor can make it hum without turning; a seized motor won’t move at all. In Seattle’s older homes with undersized ductwork, blower motors work harder and fail sooner. We match replacement motors to your system’s airflow requirements.
Trusted Brands We Service in Seattle
Our technicians train on nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We stock common failure parts for Rheem, York, and Bryant systems locally, which means faster turnaround on Seattle repairs and fewer return trips for parts. If you live in Capitol Hill or Ballard and your Daikin heat pump needs a reversing valve, we don’t order from a warehouse three states away. We pull it from our Seattle inventory, test it, and get your heat running the same day.
Common Furnace Repair Problems We See in Seattle Homes
- Short-cycling from undersized ductwork. Original 1920s ductwork in Ballard or Wallingford can’t handle the static pressure of a modern furnace. The blower motor overheats, safety switches trip, and the system shuts down before the house warms. We measure static pressure with a manometer and redesign the duct layout when a simple swap won’t work.
- Single-zone systems that can’t balance a divided floor plan. Many Craftsman homes were later converted into duplexes or had walls moved, but the furnace still feeds one zone. Upstairs bedrooms freeze while the living room overheats. We evaluate whether zoning dampers or a mini-split supplement makes more sense than fighting the original design.
- 100-amp electrical panels that stall equipment upgrades. Pre-1950s homes in Fremont and Queen Anne often have 100-amp service. A modern furnace with variable-speed controls or any heat pump needs more capacity. We coordinate the panel upgrade as a standard line item, not an afterthought that delays your job two weeks.
- Heat exchanger cracks in converted oil furnaces. Older oil-to-gas conversions in Seattle sometimes retained the original heat exchanger, which corrodes from years of acidic condensation. We inspect with a borescope, document cracks with photos, and explain why replacement is a safety issue, not a sales pitch.
Pricing for Furnace Repair in Seattle, WA
| Service | Price Range in Seattle |
|---|---|
| Furnace Repair (most common repairs) | $175-$825 |
| Annual Furnace Tune-Up | $95-$235 |
What moves a job toward the higher end? Compressor replacement on a heat pump, heat exchanger replacement in a mid-efficiency furnace, or jobs requiring electrical panel coordination. What keeps it lower? Ignitor swaps, flame sensor cleaning, capacitor replacement, or pressure switch adjustments. We give you a written price before we start, and that number doesn’t change when we’re halfway through the job. Estimates are free. Call (817) 402-2972 to schedule.
We Also Serve Cities Near Seattle
Our Seattle crews also handle furnace repair in Medina, Bellevue, Mercer Island, and Kirkland. Same written guarantee, same upfront pricing, same live-answer phones. If you’re in our service area, you’re covered by our Furnace Repair team with the full Kingswell standard.
Serving Seattle, WA - Our Local Coverage Area
We’re based in the Seattle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Seattle
The original ductwork in your Craftsman was sized for a low-static-pressure oil furnace, not a modern gas unit with a higher-speed blower. The new furnace pushes against too much resistance, the motor overheats, and the high-limit switch shuts it down. We measure static pressure across the system and often find the solution is duct modification or a furnace specifically selected for lower external static pressure, not another swap.
Almost always, yes, if your home still has 100-amp service. Seattle City Light’s territory includes many pre-1950s homes with original panels. A heat pump’s compressor and backup heat strips together can pull 60 amps alone, leaving no headroom for water heaters, dryers, or kitchen loads. We include the panel upgrade in our written scope and coordinate the electrical sub-work so your project doesn’t stall.
Many Wallingford Craftsman homes were originally heated with cast-iron radiators or gravity-feed warm-air systems that used wall cavities and joist spaces instead of metal ductwork. When oil furnaces were later added, some installers ran minimal ducting or relied on the original chase paths. When that furnace dies, there’s often no proper duct system to connect a modern unit to. We design ground-up duct layouts or recommend ductless mini-splits depending on your goals.
A repair alone usually can’t overcome a fundamental zoning problem. Capitol Hill homes often have one thermostat downstairs and no return-air path from upstairs. We can sometimes improve airflow with duct sealing and balancing, but the real fix is usually adding a second zone or a ductless mini-split for the upper floor. We’ll tell you honestly which approach makes sense after we see your layout.
Washington State’s energy code and Seattle City Light’s incentive programs favor high-efficiency heat pumps, and the mild climate here means you get excellent return from a 16+ SEER2 unit with a high HSPF2 heating rating. We size to Manual J load calculations and help you navigate available rebates. Call (817) 402-2972 and we’ll walk through the numbers for your specific home.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Seattle since 2003.