Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across West Palm Beach
Most furnace repairs in West Palm Beach run $150-$700 and are finished in a single visit, with our Furnace Repair team keeping parts on the truck for the nine brands we service. When your furnace quits on a January night and the temperature inside starts matching the 50s outside, you need a technician who knows why West Palm Beach systems fail differently than they do inland. We’re based in Miami with dispatch coordinated from our South Florida office, and our crews serve West Palm Beach neighborhoods directly - no out-of-region contractors, no third-party answering service. Call (817) 402-2972 and a live person picks up, 24 hours a day, every day of the year.
Why Coldharbour Heating & Air Is West Palm Beach’s Preferred Furnace Repair Company
We’ve worked in West Palm Beach since 2003 as an independently owned member of the Kingswell network, and our reputation here is built on showing up in the window we promised and handing you the price before a tool comes out. Homeowners in Flamingo Park, El Cid, and Northwood know our trucks because we’ve been the ones crawling through 18-inch attics to reach furnaces tucked into original 1940s closets.
Our response time to West Palm Beach is typically same-day for no-heat calls, and we carry capacitors, contactors, ignitors, and blower motors for Rheem, York, Daikin, Bryant, and the other major brands so we don’t waste your time with a parts run. Every repair comes with our 365-Day Done Right Promise in writing - if it fails inside a year, we come back and fix it at no charge. That’s The Kingswell Way, and it’s non-negotiable on every job.
Furnace Maintenance in West Palm Beach
Furnace Maintenance in West Palm Beach is a flat $80-$200 and includes a written report of everything we find, because a furnace that sits idle through eight months of Florida humidity develops problems you won’t notice until the first cold snap. We check the heat exchanger for corrosion from salt-laden Intracoastal air, test the blower motor amp draw against manufacturer spec, and measure static pressure to see if your old ductwork is forcing the system to work harder than it should.
What the Visit Covers
Our technician arrives in a marked van, background-checked and uniformed, and starts with a combustion analysis to verify your furnace is burning clean and venting safely. We pull and inspect the blower assembly, clean the flame sensor, and check all electrical connections for the green corrosion that salt air accelerates. You get a written checklist before we leave, with photos if we find anything that needs attention.
When West Palm Beach Homeowners Need It
Schedule maintenance in October or November, before the first real cold front drops temperatures into the 40s and every HVAC company in Palm Beach County is booked solid. For homes in historic districts like El Cid or Flamingo Park, where the furnace may be original to a 1960s addition or a later retrofit, we pay special attention to whether the duct system was ever properly resized for the load.
Heat Pump Repair in West Palm Beach
Heat Pump Repair in West Palm Beach covers the same $150-$700 range as furnace work, because most heat pumps here are air-source systems that switch between heating and cooling modes, and the same outdoor unit handles both jobs. When your heat pump blows cold air in heat mode, the problem is often a stuck reversing valve, low refrigerant charge, or - very common in West Palm Beach - a corroded capacitor or contactor on the outdoor section that can’t pull in to start the compressor.
Refrigerant and Electrical Faults
We pressure-test the system, check for leaks at the flare fittings and line set, and verify the defrost board is cycling properly. Salt-air corrosion attacks the electrical compartment first, so we open it and inspect every terminal, every spade connector, and the control board itself for the white or green buildup that causes intermittent failures.
Older Heat Pumps in Tight Spaces
In historic districts with screening requirements, like Flamingo Park and El Cid, the outdoor unit may be tucked behind a fence or into a side yard with poor airflow. We measure the temperature split across the coil and check whether the unit is short-cycling because it’s choked for air, not because the heat pump itself is failing.
Trusted Brands We Service in West Palm Beach
Our trucks carry common parts for Rheem, York, Daikin, and Bryant systems, plus the other five major brands we train on: Carrier, Trane, Lennox, Goodman, and American Standard. That means when we pull up to your home in West Palm Beach, we’re not calling around for a compatible ignitor or blower motor - we likely have it on the shelf. For specialized components, our Miami-based parts coordination gets them moving fast, and our technicians are trained to diagnose across all nine brands rather than guessing. Whether your furnace is a 15-year-old York in a Northwood bungalow or a newer Daikin in a downtown condo, we can work on it.
Common Furnace Repair Problems We See in West Palm Beach Homes
- Corroded electrical components - Capacitors, contactors, and control boards fail early because Intracoastal salt air reaches them across the whole city, not just the waterfront. We see this in Palm Beach Gardens too, but West Palm Beach’s tighter lot lines and older housing stock mean the outdoor unit often sits closer to the street and catches more spray during storms.
- Undersized or leaky original ductwork - In 1920s-1950s CBS homes, the duct system was often retrofitted later through minimal attic space, using runs too narrow for modern airflow. The furnace short-cycles or never satisfies the thermostat, and homeowners blame the furnace when it’s actually a distribution problem.
- Single-zone systems in unbalanced floor plans - Pre-war homes weren’t designed for central heat. One thermostat in the living room can’t manage bedrooms added in a 1970s renovation, so the furnace runs constantly while the back of the house stays cold. This is a control and zoning issue, not necessarily a furnace failure.
- Heat exchanger corrosion from salt-air exposure - Even the indoor heat exchanger can carry corrosion if the return air path pulls through a garage or utility closet with outdoor ventilation. We inspect with a borescope and check CO levels whenever we see rust streaks or irregular flame patterns.
Pricing for Furnace Repair in West Palm Beach, FL
We don’t quote over the phone for repair work because two “no heat” calls can have completely different root causes, but we do promise a written price before any work begins, and that price doesn’t change at the door. Here’s what typical repairs run in the West Palm Beach market:
| Service | Price Range |
|---|---|
| Furnace Repair | $150-$700 |
| Heat Pump Repair | $150-$700 |
| Furnace Maintenance | $80-$200 |
A simple ignitor replacement might land at the low end, while a blower motor or heat exchanger repair pushes toward the top. What drives cost is parts, labor time, and whether we need to address secondary damage - like a capacitor that failed and took the control board with it. We explain all of this before you approve the work, and estimates are always free. Call (817) 402-2972 to schedule.
We Also Serve Cities Near West Palm Beach
Our service area extends throughout central Palm Beach County, including Furnace Repair in West Palm Beach proper plus Palm Beach, Greenacres, North Palm Beach, and Palm Beach Gardens. Same written guarantee, same upfront pricing, same live-answer phone coverage no matter which city you’re calling from.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in West Palm Beach
Your ductwork is likely undersized for the load, or the single-zone system was never designed to serve an unbalanced floor plan. In Flamingo Park’s 1940s-1950s CBS homes, we regularly find original duct runs too narrow to push enough heated air to additions or converted spaces, and the thermostat in the living room shuts the system off before distant rooms reach temperature. We measure static pressure and airflow at each register to confirm whether the problem is the furnace or the distribution - call (817) 402-2972 for a free diagnostic.
It affects both, because your furnace shares electrical control with the outdoor unit or relies on the same air handler. The salt-laden Intracoastal air corrodes condenser coils, refrigerant line sets, and electrical components across virtually the entire city, not just the coastal strip. A failed capacitor or contactor on the outdoor section can prevent the indoor blower from running in heat mode, so we treat every furnace repair call as a two-part check: heat-side components plus the corrosion-driven electrical faults that show up first outside. This two-part approach catches problems other companies miss.
Replace if the heat exchanger is cracked or corroded beyond safe operation, if repair costs exceed roughly half the price of a new system, or if the existing ductwork makes a like-for-like swap a waste of money. In 1950s CBS homes, we often find that undersized original ductwork and single-zone controls mean a new furnace connected to old infrastructure performs nearly as poorly as the old one. We’ll show you the static pressure readings and explain whether a repair buys you comfortable years or whether the system needs redesign. Our written estimate covers both scenarios so you can decide.
Yes, we work in El Cid regularly and are familiar with the city’s screening and placement requirements for outdoor units in National Register historic districts. The unit must not be visible from primary street frontage, which often means side-yard or rear-setback installations with tighter access. We bring the right tools for confined spaces and coordinate with building management if you’re in a multi-unit property. Our technician will need clear access to the unit for testing and repair, but we’ve handled screened installations many times.
Corroded capacitors and contactors on the outdoor section, running $150-$280 for parts and labor. Because the salt air accelerates electrical corrosion across the whole city, these components fail earlier than manufacturer estimates suggest, and the symptom is often “no heat” even though the furnace itself is fine. We stock replacements for all nine major brands and can usually complete the repair in one visit. Call (817) 402-2972 for an exact quote - estimates are free.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving West Palm Beach since 2003.