Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable AC Installation Across Irving
Most homeowners in Irving who need a new air conditioner installed can expect to pay between $3,500 and $7,500 for a complete central AC system, with the job typically scheduled within a few days of your call and completed in one to two days depending on your home’s setup. Our AC Installation team dispatches from our Dallas-Fort Worth office and serves Irving neighborhoods directly, from the Las Colinas corridor down to the slab ranches south of Highway 183. Call (817) 402-2972 for a free written estimate with a fixed price before any work begins.
Irving sits in a unique spot. The same city contains two entirely different HVAC worlds. North of 114, Las Colinas rises with corporate towers, hotels, and condominiums running rooftop package units and chiller plants. South and central Irving hold thousands of 1955-1975 slab-on-grade ranch homes with original ductwork buried in or just above the foundation, battling Blackland Prairie clay that swells in wet seasons and shrinks in drought. We’ve worked both sides of that divide since 2003. That dual fluency matters when you’re choosing a contractor. A company that only knows one world will misdiagnose problems in the other.
Why Coldharbour Heating & Air Is Irving’s Preferred AC Installation Company
We’re independently owned and operated as part of the Kingswell network, which means we follow The Kingswell Way: say the price before the work starts, show up in the window promised, leave the place cleaner than found, put every guarantee in writing, and come back if it fails. Our 365-Day Done Right Promise applies to every repair we perform, written down before the technician leaves your Irving home.
Our technicians are background-checked, uniformed, and trained on nine major residential HVAC brands including Trane, Lennox, Goodman, and Rheem. When you call (817) 402-2972, a live person answers the phone 24 hours a day, 7 days a week. No voicemail trees. No waiting until morning.
We know Irving’s specific headaches. The February 2021 ice storm exposed heat-pump deficiencies across the city. Summer ambient temperatures north of 100°F push condensers to their limit. And in south Irving’s older neighborhoods, we’ve learned the hard way that slab ductwork failure can make two consecutive AC replacements feel undersized until someone pressure-tests the buried lines. That local pattern recognition saves our customers from buying equipment they don’t actually need.
Central Air Conditioning Installation in Irving
Central Air Conditioning Installation in Irving means sizing and installing a complete split-system or package unit matched to your home’s actual heat gain, not a rule-of-thumb guess based on square footage. In Irving’s climate, that load calculation has to account for 100°F-plus outdoor design temperatures, roof insulation levels common to local housing stock, and, critically, whether your duct system is actually delivering what the calculation assumes. A typical Central Air Conditioning Installation in Irving runs $3,500-$7,500, including equipment, refrigerant line set, electrical connections, and startup commissioning.
When Your Old System Can’t Keep Up
If your current unit runs constantly from June through September, blows warm air in afternoon peaks, or needs refrigerant recharge every season, the compressor or condenser is likely failing. In Irving, we see this accelerated by years of operation at 100°F ambient, which strains capacitors and raises head pressure. We don’t quote replacement tonnage until we’ve verified your duct system can move the air the new unit produces.
Duct Diagnostics Before Equipment Selection
Here’s where Irving’s housing stock changes the math. South of Airport Freeway, original in-slab ductwork from the 1960s and 1970s often cracks at joints due to soil movement. Conditioned air leaks into Blackland Prairie clay instead of reaching your rooms. A new 3.5-ton system won’t solve that. We static-test and pressure-test ducts before specifying equipment. Sometimes the fix is duct sealing and rerouting, sometimes it’s a complete duct replacement overhead, and sometimes the slab duct is sound and the unit alone was the problem. We find out before you spend the money.
Furnace Installation in Irving
Furnace Installation in Irving covers both gas-fired and electric heating systems, with growing demand for heat pumps on properties without natural gas service. A typical Furnace Installation in Irving runs $3,500-$7,500, same range as AC installation because both jobs involve full system changeout, electrical or gas connections, and duct integration. In Irving’s climate, furnace sizing must account for occasional single-digit winter lows, the 2021 ice storm’s lessons about heat-pump defrost performance, and whether your home sits on a gas main or needs propane or all-electric alternatives.
Propane and Heat-Pump Paths for Unserved Properties
On the rural edges of Irving and in pockets where natural gas never reached, we regularly install propane-fired furnaces and cold-climate heat pumps. Propane requires tank sizing and line burial. Heat pumps need defrost strategy suited to North Texas ice events. We calculate total cost of ownership for both paths and give you a written comparison before you decide. No defaulting to gas just because it’s familiar.
Wind Exposure and Outbuilding Considerations
Exposed properties with no wind shelter, workshop buildings, and detached garages need more than standard equipment placement. Condenser coils face higher debris load and faster corrosion. Refrigerant line sets need additional support and clearance. We specify elevated mounting, wind baffles where appropriate, and protective screening for rural-edge Irving installs. Standard suburban clearances don’t translate directly to open land.
Trusted Brands We Service in Irving
Our technicians carry training certifications and common repair parts for Trane, Lennox, Goodman, and Rheem systems, among the nine major residential HVAC brands we cover. For Irving customers, that means faster turnaround on warranty claims and fewer days waiting for a specialty part to ship. We don’t push one brand over another. We match equipment to your home’s duct capacity, your budget, and your efficiency goals, then source what fits. If you’ve got a preference based on past experience, we’ll work with it. If you don’t, we’ll explain the practical differences between the lines we stock locally and let you choose without pressure.
Common AC Installation Problems We See in Irving Homes
- Undersized-feeling systems after replacement. Homeowners in south Irving’s slab ranches replace an aging AC, pay for higher tonnage, and still can’t hold setpoint on 100°F afternoons. The culprit is usually cracked in-slab ductwork dumping conditioned air into Blackland Prairie clay. We pressure-test before we quote tonnage.
- Gas furnace quotes for homes without gas service. Rural-edge Irving properties and some older subdivisions never got natural gas mains. Contractors who don’t ask assume gas and quote accordingly, then discover the problem mid-project. We verify fuel availability on our first visit.
- Condenser damage from wind and debris on exposed lots. Outbuildings, workshops, and unsheltered rural properties around Irving face higher wind loads and flying debris during spring storms. Standard condenser placement and clearance specs fail early. We spec for actual conditions.
- Heat pump defrost failures after ice events. The February 2021 storm revealed how many Irving heat pumps lacked adequate defrost controls or backup heat staging. We size auxiliary heat properly and set defrost cycles for North Texas’s occasional hard freezes, not just mild winters.
Pricing for AC Installation in Irving, TX
We’re upfront about numbers because The Kingswell Way requires a written price before any work begins. Here’s what Irving homeowners typically invest:
| Service | Price Range in Irving |
|---|---|
| Central Air Conditioning Installation | $3,500 - $7,500 |
| Furnace Installation | $3,500 - $7,500 |
| AC Repair | $150 - $650 |
| Furnace Repair | $150 - $700 |
| Tune-Up | $80 - $200 |
What moves you within these ranges? Equipment efficiency rating (SEER2), whether duct modification or replacement is needed, electrical panel capacity, and the complexity of your home’s layout. A straight swap on a slab ranch with sound overhead ductwork sits at the lower end. A full system with duct replacement, electrical upgrade, and propane tank installation runs higher. We give you a single written fixed price after our on-site evaluation. That price does not change when the crew arrives. Call (817) 402-2972 to schedule your free estimate.
We Also Serve Cities Near Irving
Our crews work throughout the Dallas-Fort Worth metro, including AC Installation in Irving and surrounding communities. We regularly install systems in Dallas, Balch Springs, Hutchins, and Mesquite, with the same written pricing, same arrival windows, and same 365-Day Done Right Promise on every job. Dispatch is coordinated from our Dallas-Fort Worth office, and we route technicians based on who’s closest to your call.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Irving
Yes. We install propane-fired furnaces and cold-climate heat pumps for Irving properties without natural gas service, and we’ll give you a written comparison of both paths including tank costs or electrical panel requirements. Call (817) 402-2972 and we’ll survey your property for the best fit.
If your current system runs constantly, rooms vary wildly in temperature, or you’ve already replaced the unit once and still can’t hold 78°F in August, buried duct leakage is the prime suspect. We run static pressure and duct leakage tests before quoting any replacement. Call (817) 402-2972 to schedule a diagnostic.
Yes. We size and install ductless mini-split systems for detached structures, accounting for wind exposure, insulation levels, and usage patterns that differ from your main house. These installs need different load calculations and often higher SEER2 ratings for intermittent use. Call for a free estimate.
For Irving’s 100°F-plus summer design temperatures, we typically recommend 15-17 SEER2 for cost-effective cooling, with 18+ SEER2 for homeowners planning long-term occupancy or prioritizing utility rebate capture. The federal minimum is 14.3 SEER2 for our region, but the payback math favors stepping up in this climate. We’ll run the numbers for your specific usage.
A straightforward system swap on a Las Colinas condo with rooftop access and sound ductwork usually completes in one day. An older south Irving slab ranch with duct diagnostics, potential rerouting, and electrical updates typically takes one to two days. We give you a firm schedule with your written price before work begins.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Irving since 2003.







Before
After
Before
After
Before
After