Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable AC Installation Across McDonough
Most AC Installation jobs in McDonough run $3,500-$7,500 for a complete system replacement, and we schedule the work after a same-day or next-day in-home evaluation where we hand you a written fixed price before any equipment gets ordered. We’re familiar with the subdivisions that went up fast during Henry County’s 2000s growth boom - the two-story production homes around Honey Creek, Lake Dow, and the Kelleytown Road corridor - and we know the specific problems those builder-grade systems develop after 15 to 20 years of Georgia summers. Our technicians are dispatched from our Atlanta office and typically arrive in McDonough within the same day window we promise. Call (817) 402-2972 to set up a free estimate.
Why Coldharbour Heating & Air Is McDonough’s Preferred AC Installation Company
We’ve been serving the McDonough area since 2003 as an independently owned and operated member of the Kingswell network, and our reputation here was built one written guarantee at a time. McDonough homeowners know that when we say we’ll arrive between 8 and 10 a.m., we mean it - and that the price on the paper we hand them before any work starts is the price they’ll pay, not an opening bid.
Our technicians are background-checked, uniformed, and trained on nine major residential HVAC brands including Trane, Lennox, Goodman, and Rheem. That matters in McDonough, where a single subdivision might have four different original equipment manufacturers across homes built in the same year. We carry common parts and can source quickly for less common systems, which keeps our turnaround tight.
Phones are answered by a live person 24 hours a day, 7 days a week. No voicemail trees, no “press 1 for service” runaround. If you’re in McDonough and your system has failed in July heat, you reach a human who can get a technician scheduled.
Heat Pump Installation in McDonough
Heat Pump Installation in McDonough is the default replacement for most homes built during the 2000s boom, since these subdivisions were wired for electric heat pumps rather than gas furnaces and our winters are mild enough that a properly sized heat pump handles the load efficiently. A complete heat pump replacement in McDonough typically costs $3,500-$7,500, which includes the outdoor condenser, indoor air handler, electrical connections, and refrigerant line set. We see the highest demand for this service in the large two-story production homes around Lake Dow and along Highway 81, where original Goodman and entry-level Carrier systems are now hitting that 15-20 year failure window all at once.
When a Heat Pump Makes Sense
McDonough’s climate - hot, humid summers and winters that rarely drop below the mid-20s - is ideal territory for a modern heat pump with a decent HSPF rating. The heat pump moves heat rather than generating it, which keeps operating costs lower than electric resistance heat through most of our heating season. During those occasional cold snaps, auxiliary heat strips kick in automatically. We inspect those strips during every install to make sure they’re functional, since neglected auxiliary elements are a common hidden failure point in McDonough homes.
Load Calculation vs. Rule of Thumb
We never match old tonnage by default. The original builder-grade systems in McDonough’s 2000s subdivisions were frequently sized by square-foot estimates that didn’t account for open staircases, large foyer volumes, or the actual orientation and window load of each home. We run a room-by-room Manual J load calculation on every replacement. In a 2005 two-story on Honey Creek Drive, we replaced an original Goodman heat pump that had been short-cycling for two summers; the real culprit was a long attic line set with almost no insulation plus a failed run capacitor, not the refrigerant leak the homeowner suspected. We ran a full load calculation instead of matching the old tonnage, upsized the line-set insulation, set the new Carrier system with a proper refrigerant charge, and cut the upstairs/downstairs split from about 9°F to under 3°F.
Ductless Mini Split Installation in McDonough
Ductless Mini Split Installation in McDonough solves the single biggest comfort complaint we hear in the 2000s-era subdivisions: the upstairs-downstairs temperature gap that original single-zone systems can’t close. A typical ductless mini split installation in McDonough runs $3,500-$7,500 depending on the number of indoor heads and the complexity of the line run. These systems are especially popular in Kelleytown Road-area homes where homeowners have finished bonus rooms over garages or converted attic space that the original ductwork never reached.
Zoning Without Rebuilding Ducts
A ductless mini split gives you independent temperature control in specific zones without tearing open walls to add ductwork. The outdoor condenser connects to compact wall-mounted or ceiling-cassette indoor units through a small line-set hole. In McDonough’s open-staircase floor plans, we often install a ductless head in the master suite and another in a bonus room, creating two independently controlled zones while the main system handles the downstairs. Homeowners tell us this cuts their upstairs complaint calls to zero.
Garage Conversions and Additions
Henry County’s growth didn’t stop in 2008, and many McDonough homeowners have added finished space that the original heat pump was never designed to serve. A ductless mini split is usually the most practical way to condition a garage conversion, sunroom, or detached workshop without overloading the main system or running new ductwork through existing structure. We size these independently and can often have them running the same day we complete the main system replacement.
Trusted Brands We Service in McDonough
Our technicians are trained to install and service Trane, Lennox, Goodman, and Rheem systems, among others. We maintain relationships with regional distributors that keep common McDonough configurations in stock or available on short order - the 3-ton and 4-ton split systems that dominate the local housing stock, the matching air handlers for two-story layouts, and the line-set insulation and refrigerant grades suited to our long, hot attic runs. If your original system was a Goodman or entry-level Carrier, we can recommend a modern equivalent or a step-up replacement that delivers better SEER2 efficiency without compatibility headaches. Parts availability matters when you’re trying to schedule an install before the next heat wave, and we plan our inventory around what McDonough homes actually need.
Common AC Installation Problems We See in McDonough Homes
- Builder-grade tonnage picked by square-foot rule of thumb, not a room-by-room load calculation. The original systems in McDonough’s 2000s subdivisions were sized fast to keep construction moving, which means replacement systems are often undersized for open-staircase floor plans and never keep up in July. We run Manual J calculations on every job.
- Original single-zone layouts that leave the upstairs 8-10°F hotter. Without a ductless mini split or zoning retrofit, a new condenser just works harder against the same airflow problem. We address this during the estimate, not after the install is done.
- Degraded refrigerant line insulation in long attic runs. Two decades of Georgia summers have cooked the minimal insulation that builders wrapped around line sets, which homeowners misread as a low refrigerant charge. New insulation is standard on our replacements, and it protects SEER2 performance.
- Emergency heat strips that haven’t been tested in years. McDonough’s cold snaps aren’t brutal, but they do happen, and neglected auxiliary elements fail when they’re finally needed. We test and document strip amp draw during every heat pump install.
Pricing for AC Installation in McDonough, GA
We believe you should know what a job costs before you invite anyone into your home. Here’s what AC installation looks like in McDonough:
| Service | Typical Range in McDonough |
|---|---|
| AC Installation (complete system replacement) | $3,500-$7,500 |
| Heat Pump Installation | $3,500-$7,500 |
| Ductless Mini Split Installation | $3,500-$7,500 |
What moves you within that range: the tonnage your home actually needs after a proper load calculation, whether we’re replacing a straight AC or a heat pump, the SEER2 efficiency tier you select, and any ductwork or zoning modifications required. We do not quote over the phone based on square footage alone. Every estimate is free, in-home, and includes a written fixed price that does not change at the door. Financing and rebate paperwork are handled in our office, not dumped on you to figure out.
We Also Serve Cities Near McDonough
Our crews work throughout Henry County and the surrounding area, including AC Installation in McDonough and nearby Locust Grove, Stockbridge, Covington, and Hampton. Each of these markets has its own housing stock and climate quirks, but the same Kingswell standards apply: written price first, firm arrival window, clean job site, and a guarantee in writing before we leave.
Serving McDonough, GA - Our Local Coverage Area
We’re based in the McDonough area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in McDonough
You don’t have to match old tonnage, and we strongly recommend against it. Most 2005-era McDonough homes were sized by rule of thumb that underestimated the load from open staircases and large foyer volumes. We run a room-by-room Manual J calculation and size the new system to the actual heat gain and loss of your home. Call (817) 402-2972 for a free estimate - we’ll show you the numbers.
Because a single-zone system with one thermostat downstairs can’t overcome the natural stack effect in a two-story home with an open staircase. In McDonough’s 2000s subdivisions, this is nearly universal. We solve it with either a zoning retrofit or a ductless mini split for the upstairs, sized independently from the main system. The new condenser alone won’t fix an airflow design problem.
Manufacturer warranties cover defects in the equipment itself - the compressor, coils, and major components - but they do not cover installation-related items like line-set insulation, refrigerant charge accuracy, or ductwork modifications. That’s why our 365-Day Done Right Promise exists: if anything we install or connect fails within a full year, we come back and correct it at no charge, regardless of what the manufacturer’s paperwork says. The guarantee is written and in your hands before we leave.
For most McDonough homes built during the 2000s boom, a heat pump is the practical replacement because the subdivision infrastructure is already set up for electric heat and our winters are mild. Modern heat pumps operate efficiently well below the temperatures McDonough typically sees. If you have existing gas lines and prefer a furnace, we can evaluate that, but the default recommendation here is heat pump for operating cost and simplicity. Call (817) 402-2972 and we’ll walk through your specific situation.
Ask whether the quoted SEER2 rating was achieved with the actual indoor coil and blower that will be installed with your outdoor unit - mismatched components can drop real-world efficiency well below the sticker number. Ask how the refrigerant line set insulation will be handled, since degraded insulation in long McDonough attic runs is a common SEER2 killer. And ask for the load calculation documentation; if a contractor won’t show their work, they didn’t do it. Estimates from Coldharbour are free and include all of this upfront.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving McDonough and Henry County since 2003.







Before
After
Before
After
Before
After