Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Alamo, CA
Most HVAC calls in Alamo involve oversized custom homes built during the 1970s-1990s with original single-zone ductwork that cannot handle 100-105°F summer heat waves or deliver even temperatures across 4,000-8,000 square feet. Coldharbour Heating & Air dispatches technicians trained on nine major brands including Trane, Lennox, and Rheem from our San Francisco Bay Area office, with live phone coverage 24 hours a day at (817) 402-2972. Our three main services each have their own Alamo page linked below.
Why Alamo Homes Are Different
Alamo sits inland in the San Ramon Valley, which means afternoon temperatures run 15-25°F hotter than coastal Bay Area cities and peak days hit 100-105°F regularly. Winter nights drop into the low 30s, so both cooling and heating matter here in ways they do not in San Francisco or even Walnut Creek near the Bay. The Delta Breeze pushing through the Carquinez Strait can swing temperatures 20-30°F within two to three hours, cycling compressors and heat exchangers hard.
The housing stock amplifies every climate stress. Most homes went up between the late 1960s and mid-1990s, with a significant share exceeding 5,000 square feet in multi-wing layouts. Original forced-air ductwork is typically undersized, poorly insulated, and configured for a single zone. In these homes, we regularly measure a 10-15°F differential between the upstairs master suite and downstairs living areas on peak days. That is not a minor comfort issue; it is a system-design problem that drives complex retrofit work far more often here than in neighboring Danville or San Ramon.
Our Main Alamo Services
Alamo homeowners call us most often for cooling repairs, heating repairs, and whole-home cooling retrofits in houses that were never designed for modern load demands.
AC Repair in Alamo
AC repair in Alamo usually means addressing compressor strain from rapid temperature cycling and undersized ductwork that cannot move enough air to protect the coil. We see refrigerant leaks traced to vibration damage in long refrigerant lines run through hot attics, and failed capacitors from sustained high-ambient operation. Our technicians carry common parts for Trane, Lennox, Goodman, and Rheem systems to complete most repairs in one visit. AC Repair in Alamo covers common failures, pricing, and what to expect when you call.
Furnace Repair in Alamo
Furnace repair in Alamo centers on igniter and flame-sensor failures in original 1980s and 1990s units, plus heat-exchanger stress from frequent on-off cycling when the Delta Breeze drops temperatures suddenly. Many Alamo furnaces are oversized for the ductwork they serve, which cracks heat exchangers prematurely and creates rollout safety risks. We inspect every furnace for combustion safety before quoting any repair. Furnace Repair in Alamo explains our diagnostic process and the 365-Day Done Right Promise.
AC Installation in Alamo
AC installation in Alamo is rarely a simple swap. Most jobs require ductwork redesign, zoning for multi-wing layouts, or full cooling retrofits in homes that have relied on window units or no cooling at all. Load calculations must account for solar gain on large roof areas and the actual square footage served, not the original 1980s design. We provide a written fixed price before ordering equipment, and we handle rebate paperwork for qualifying high-efficiency systems. AC Installation in Alamo details sizing, zoning options, and timeline.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Alamo
Our technicians are trained to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We stock common capacitors, contactors, igniters, and flame sensors locally, which means most Alamo repairs do not wait for parts. See our brands for full coverage details.
Pricing for HVAC Company in Alamo, CA
| Service | Typical range in Alamo |
|---|---|
| AC Repair | $150-$650 |
| Furnace Repair | $150-$700 |
| AC Installation | $3,500-$7,500 |
| Tune-Up | $80-$200 |
Prices in Alamo trend toward the higher end of these ranges when jobs involve ductwork modification in large multi-wing homes or zoning retrofits to correct single-zone limitations. Before any work begins, we hand you a written price that does not change at the door. That is The Kingswell Way, not a special offer.
Neighborhoods We Serve in Alamo
We dispatch to all Alamo neighborhoods from our San Francisco Bay Area office, with most calls reached within the same day. Crews are familiar with the access patterns, lot sizes, and typical system ages in each area.
- Alamo Creek
- Stone Valley
- Westside Alamo
- Round Hill Country Club area
- Livorna Estates
Service Area – Cities Near Alamo
Our service radius covers the full San Ramon Valley and surrounding communities. We regularly run calls to Walnut Creek, CA, Moraga, CA, Lafayette, CA, and Danville, CA, with scheduling coordinated so Alamo homeowners are not deprioritized for nearby work.
Serving Alamo, CA - Our Local Coverage Area
We’re based in the Alamo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Alamo, CA
Most calls in Alamo are reached the same day, and emergency no-heat or no-cooling situations are prioritized. Our phones are answered by a live person 24 hours a day, so you will know your arrival window when you hang up. Call (817) 402-2972 to check today’s availability.
Some Alamo neighborhoods with architectural review committees require notice for outdoor unit placement changes, but standard repairs and like-for-like replacements rarely trigger delays. We handle permit filings when ductwork modifications or electrical upgrades require them.
Yes. In Alamo’s large single-zone homes, we regularly install zoning dampers or redesign duct runs to correct 10-15°F differentials. This is usually a multi-day retrofit with a written fixed price, not a same-day repair. Call (817) 402-2972 for a free estimate.
Call Coldharbour Heating & Air at (817) 402-2972 for a free estimate. A live person answers 24 hours a day, and every repair comes with our written 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alamo Customers Say
"AC died overnight with a newborn in the house. They bumped us up the list and had it running by noon. I about hugged the guy. Fair price even on a rush call."
- Celeste Ngo"The repair was done well and quickly. Scheduling over the phone was a little clunky and I got transferred twice, but the tech himself was great and on time."
- Brett Haygood"Furnace was short cycling all winter. They diagnosed a bad sensor instead of condemning the whole unit like I feared. Cheap fix, honest call."
- Russ Tiedemann