Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Argyle
Most furnace repairs in Argyle run $150-$700 and our technicians can usually diagnose the problem within the first 30 minutes of arrival. We dispatch from our Dallas-Fort Worth office and keep common furnace parts stocked for Argyle’s major subdivisions, which means same-day fixes for most heating failures.
Argyle’s grown fast. We’ve watched it transform from Denton County ranch land into a community of large custom homes in places like Harvest, Canyon Falls, and the estates along FM 407. That growth brought a specific problem we see weekly: builder-grade furnaces installed by tonnage rule of thumb, never revisited after homeowners finished bonus rooms and garage conversions. We’re Coldharbour Heating & Air, and our Furnace Repair team knows the difference between a failing heat exchanger and a system that was simply never sized for the house it now heats. If your furnace is blowing cold air, cycling on and off, or not keeping up on Argyle’s coldest nights, call (817) 402-2972. A live person answers, 24 hours a day.
Why Coldharbour Heating & Air Is Argyle’s Preferred Furnace Repair Company
We’ve worked in Argyle long enough to know which builders spec’d which equipment, and which subdivisions have the propane-to-natural-gas split that confuses homeowners when their furnace won’t light. Our technicians are background-checked, uniformed, and trained on nine major brands including Trane, Lennox, and Goodman. When we show up at your door in Argyle, we arrive in a marked van during the arrival window we promised, not a four-hour guessing window.
Our pricing is written down before any work starts. No exceptions. That written price is part of The Kingswell Way: say the price before the work, show up in the window given, leave the place cleaner than found, put the guarantee in writing, and come back if it fails. Every repair we complete in Argyle carries our 365-Day Done Right Promise. If the repair fails within a full year, we return and correct it at no charge. That guarantee is on paper, not a handshake.
Phones are answered by a live person around the clock. No voicemail trees. No “call back in the morning” when your furnace quits on a February night.
Heat Pump Repair in Argyle
Heat Pump Repair in Argyle addresses systems that move heat rather than generate it, which means they work hardest when outdoor temperatures sit in the 30s and 40s, exactly where Argyle spends much of its winter. Because Argyle sits in the North Texas ice-storm belt, we see acute spikes in heat pump failures after freeze events, often from frozen condensate drains or damaged outdoor coils. Most heat pump repairs in Argyle fall in the same $150-$700 range as furnace work, though refrigerant leaks and compressor issues can push toward the higher end.
Defrost Cycle Failures
When ice builds on the outdoor coil and the defrost board or sensor fails, the heat pump locks into cooling mode or shuts down entirely. In Argyle, where humidity swings are sharp and freeze-thaw cycles stress components, this is a common mid-winter call. We test the defrost thermostat, board, and reversing valve to isolate whether it’s a control issue or a refrigerant charge problem.
Supplemental Heat Lockouts
Most Argyle heat pumps rely on electric strip heat or a dual-fuel gas furnace for backup when temperatures drop below the balance point. When the auxiliary heat won’t engage, the system blows lukewarm air and runs continuously. We trace the control signal from the thermostat through the outdoor unit to the indoor air handler, checking sequencers, limit switches, and low-voltage wiring that Cross Timbers clay soil movement can loosen at the foundation penetration.
Heating Repair in Argyle
Heating Repair in Argyle covers furnaces, heat pumps, and hybrid systems, but the majority of our winter calls involve gas furnaces in the newer subdivisions. The work ranges from ignitor replacements and gas valve adjustments to blower motor repairs and heat exchanger inspections. Most heating repairs in Argyle cost between $150 and $700, with simple fixes like ignitors at the lower end and heat exchanger or control board replacements toward the top.
High-Limit Trips from Undersized Systems
This is the call we get most often in Argyle’s post-2010 homes. The furnace heats, shuts off prematurely, and repeats. Homeowners think it’s a thermostat problem. Usually it’s static pressure: the blower can’t move enough air across an evaporator coil and duct system that was never sized for the finished square footage. We measure static pressure, check blower speed taps, and often find the original load calculation missed conditioned spaces added after build.
Propane Conversion and Valve Issues
Argyle still has rural pockets where natural gas never reached. Propane furnaces require different gas valve orifices and pressure settings than natural gas units. When a homeowner switches suppliers or a regulator drifts, the furnace won’t light or burns poorly. Our technicians carry propane manometers and the correct orifice sizing charts for the brands we service.
Trusted Brands We Service in Argyle
Our vans carry parts and diagnostic tools for Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. In Argyle specifically, we see a concentration of Trane and Carrier builder-spec systems in Harvest and Canyon Falls, with Lennox and Goodman more common in custom builds where the homeowner selected the equipment. We stock ignitors, flame sensors, blower motors, and control boards for these brands locally, which means most Argyle repairs don’t wait on a parts run to Dallas. If your system is a Rheem or Goodman from the mid-2000s still running on a rural Argyle property, we have the orifices and pressure specs for propane conversions too.
Common Furnace Repair Problems We See in Argyle Homes
- Short-cycling on high-limit in new construction. In Harvest and similar subdivisions, builder-grade furnaces locked into single-zone systems short-cycle the first cold snap because static pressure exceeds 0.5 in. w.c. The original load calculation never accounted for finished bonus rooms above three-car garages.
- Condensate drain freeze-ups after ice storms. Argyle’s 90%+ condensing furnaces and heat pumps have exterior drain lines that freeze solid during events like February 2021. Water backs up, trips pressure or limit switches, and the furnace locks out until the drain thaws and is cleared.
- Intermittent lockouts from shifting clay soils. The Cross Timbers clay beneath Argyle expands and contracts seasonally, stressing low-voltage wiring and refrigerant line sets where they penetrate the foundation. This causes phantom thermostat readings, failed ignitor sequences, and blower motors that run without heat.
- Failed capacitors and blower motors in oversized homes. When a furnace is undersized for its duct system, the blower motor runs at maximum speed continuously. Capacitors fail early. We see this in 4,000+ sq ft Argyle homes where the original HVAC sub never adjusted for the actual conditioned envelope.
Pricing for Furnace Repair in Argyle, TX
We believe you should know what furnace repair costs before you invite anyone into your home. Here’s what we charge for heating work in Argyle:
| Service | Price Range in Argyle |
|---|---|
| Furnace Repair | $150-$700 |
| Heat Pump Repair | $150-$700 |
| Tune-Up / Maintenance | $80-$200 |
Most ignitor replacements run $150-$280. Blower motor repairs or replacements range $300-$550. Control board replacements typically fall between $400-$700. Heat exchanger issues, if repairable, sit at the upper end; if cracked, we recommend replacement for safety. The written price we hand you before any work begins is the price you pay. No change at the door. No “we found something else” add-ons without a second written approval. Estimates are free, and we don’t charge overtime for after-hours calls in Argyle.
We Also Serve Cities Near Argyle
Our Furnace Repair in Argyle crews also respond to heating emergencies in Flower Mound, Roanoke, Lake Dallas, and Denton. Same written pricing, same 365-Day Done Right Promise, same live-answer phones. Dispatch is coordinated from our Dallas-Fort Worth office, but the technician who arrives knows the local soil conditions, building patterns, and utility splits of each community.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Argyle
Your furnace is almost certainly tripping its high-limit switch because the blower cannot move enough air against static pressure higher than the system was designed for. In Argyle’s newer subdivisions, builders frequently size equipment by rule of thumb before upstairs game rooms and garage conversions are finished, then never revisit the load calculation. We measure static pressure, adjust blower speed taps, and often add return-air paths to correct the underlying airflow problem. Call (817) 402-2972 for a free diagnostic.
Yes. Argyle has rural pockets and newer developments where natural gas lines never reached, leaving homeowners on propane. Propane furnaces use different gas valve orifices and manifold pressures than natural gas units. Our technicians carry propane-specific tools and orifice sizing charts for every brand we service, including Goodman and Rheem systems common in rural Argyle properties. The repair process is the same; only the fuel-side setup differs.
Most furnace repairs in Argyle cost between $150 and $700, with simple fixes like ignitors and flame sensors at the lower end and blower motors, control boards, or heat exchanger work toward the top. We provide a written, itemized price before any work begins, and that price does not change. Estimates are free. Call (817) 402-2972 for an exact quote on your specific system.
Ice storms cause two common failures in Argyle heat pumps: frozen condensate drain lines that back up and trip safety switches, and physical ice buildup on outdoor coils that cracks fins or damages the defrost sensor. During the February 2021 event, we also saw widespread low-voltage wiring failures where ice penetration at the foundation line set caused intermittent shorts. The failure often looks catastrophic but resolves with drain clearing, defrost component replacement, or wiring repair.
Repair if the furnace is under 12 years old, the heat exchanger is intact, and the underlying issue is a correctable airflow or component problem. Replace if the system is over 15 years old, the heat exchanger is cracked, or the original equipment was so poorly matched to the home that no repair fixes the chronic short-cycling. In Argyle specifically, we often find that replacing an undersized builder-spec furnace with properly load-calculated equipment solves comfort problems that years of repairs never touched. We offer written fixed-price quotes for both options.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Argyle and the Dallas-Fort Worth area since 2003.