Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Redmond, WA
Most HVAC calls we get in Redmond involve homes built during the Microsoft campus expansion from 1985 to 2005 that were never designed for cooling. These houses run on original gas furnaces with duct systems that need careful modification before a heat pump or AC can work properly. Our technicians are trained on nine major brands including Goodman, Rheem, and Daikin, and every repair comes with a written 365-Day Done Right Promise. If your furnace quits on a foggy January morning or you’re finally adding AC after the last heat dome, call us at (817) 402-2972. We answer live, 24 hours a day.
Why Redmond Homes Are Different
Redmond’s housing boom left a specific legacy. Thousands of homes on Education Hill, in Bear Creek, and around Overlake were built with gas furnaces only, on the assumption that Pacific Northwest summers would stay mild. The 2021 heat dome changed that assumption for good. Now we’re regularly retrofitting heat pumps into heating-only duct systems, a job that barely exists in cities with newer stock.
The geography compounds the problem. Redmond sits in the Sammamish River valley, which holds marine moisture and morning fog longer than elevated Bellevue or Kirkland. Crawl spaces stay damp from October through April, accelerating mold around poorly sealed duct boots. Most of these homes have ducts running through unconditioned crawl spaces, so moisture intrusion and duct sealing are persistent issues we address on nearly every job.
The original 80,000-100,000 BTU single-stage Carrier or Lennox furnaces from the mid-1990s are still running in many of these houses. Their ducts were intentionally oversized for heat distribution, but that same sizing creates static-pressure problems when a heat pump’s air handler tries to push cooling airflow through the same trunk lines. We often need a blower-speed audit and damper balancing before the new system will pass King County inspection. This isn’t a generic install; it’s a retrofit problem specific to Redmond’s era of tech-suburb buildout.
Our Main Redmond Services
Redmond homeowners call us most often for these three jobs, each shaped by the local housing stock and climate conditions.
AC Repair in Redmond
AC repair in Redmond usually means a system that was added to a house never designed for cooling. We find refrigerant leaks at linesets run through crawl spaces, compressor strain from mismatched coils, and airflow issues caused by ducts that were sized for heat only. Our technicians carry common parts for Goodman, Rheem, and Daikin systems, and most repairs are completed same day. Every repair includes a written price before we start and a 365-Day Done Right Promise before we leave. AC Repair in Redmond
Furnace Repair in Redmond
Furnace repair in Redmond often involves those original mid-1990s gas units still heating homes on Education Hill and in Bear Creek. We replace failed igniters, clean flame sensors fouled by valley moisture, and track down intermittent pressure-switch problems caused by blocked venting through damp crawl spaces. Because these systems are past their design life, we always explain whether a repair makes sense or if a heat-pump conversion is the smarter path. Furnace Repair in Redmond
AC Installation in Redmond
AC installation in Redmond is increasingly a heat-pump retrofit into existing heating-only ductwork. We start with a load calculation and static-pressure test, then modify or seal ducts as needed before the new air handler goes in. King County’s electrification incentives and the reality of hotter summers make this the dominant new-system job in Redmond. We handle the rebate paperwork and provide a fixed written price that doesn’t change at the door. AC Installation in Redmond
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Redmond
Our technicians are trained to service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We stock common igniters, capacitors, contactors, and refrigerant fittings for Goodman, Rheem, and Daikin systems locally, which keeps most Redmond repair calls to a single visit. our brands
Pricing for HVAC Company in Redmond, WA
| Service | Typical range in Redmond |
|---|---|
| AC Repair (minor, capacitor/contractor) | $150-$350 |
| AC Repair (moderate, refrigerant leak repair) | $350-$500 |
| AC Repair (major, compressor-related) | $500-$650 |
| Furnace Repair (minor, igniter/sensor) | $150-$280 |
| Furnace Repair (moderate, blower motor) | $280-$450 |
| Furnace Repair (major, heat exchanger/valve) | $450-$700 |
| AC Installation (heat pump retrofit, basic) | $3,500-$5,500 |
| AC Installation (heat pump retrofit, with duct mods) | $5,500-$7,500 |
| Tune-Up (annual maintenance) | $80-$200 |
What pushes prices toward the higher end in Redmond: duct modifications for heat-pump retrofits, crawl-space access issues in damp conditions, and King County permit fees for new system installations. What keeps them predictable: we give you a written price before any work begins, and that price does not change when the technician is at your door. That’s The Kingswell Way, not a special offer.
Neighborhoods We Serve in Redmond
We dispatch from our Seattle office and typically reach Redmond homes within 45 minutes during business hours, with emergency coverage around the clock. These are the neighborhoods where we do most of our work:
- Education Hill
- Bear Creek
- Overlake
- Redmond Ridge
- Downtown Redmond
Service Area – Cities Near Redmond
Our crews work throughout the Eastside and regularly cross into Kirkland, WA for calls along the 520 corridor, Bellevue, WA for homes on the west slope of the lake, Sammamish, WA for the plateau neighborhoods above the valley, and Medina, WA for waterfront properties with similar vintage HVAC systems. Scheduling is coordinated from our Seattle office, with local technicians assigned to each call.
Serving Redmond, WA - Our Local Coverage Area
We’re based in the Redmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Redmond
We answer live 24 hours a day, and most Redmond emergency calls are reached within 45 minutes during peak hours. Nights and weekends use the same dispatch system, not an answering service. Call (817) 402-2972 and a real person will pick up.
King County requires permits for new system installations and heat-pump conversions; we pull these as part of the job. Some Redmond neighborhoods, particularly Redmond Ridge, have HOA architectural review for exterior condenser placement. We handle the paperwork and flag any HOA requirements during your estimate.
Redmond’s 1985-2005 housing stock was built with gas furnaces only, and Washington State’s clean-building codes now discourage new gas equipment. A heat pump uses your existing ducts to both heat and cool, which is why retrofits dominate our Redmond installation schedule. The 2021 heat dome made cooling a necessity, not a luxury, in homes that never had it.
Call (817) 402-2972 for a free estimate. We’ll give you a written price before any work begins, show up in the window we promise, and back every repair with our 365-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redmond Customers Say
"The repair was done well and quickly. Scheduling over the phone was a little clunky and I got transferred twice, but the tech himself was great and on time."
- Brett Haygood"Furnace was short cycling all winter. They diagnosed a bad sensor instead of condemning the whole unit like I feared. Cheap fix, honest call."
- Russ Tiedemann"Thermostat and a weak blower. Fixed both in one visit, explained the guarantee, and didn't leave a mess. I've already recommended them to my neighbor."
- Natalie Esposito