Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Justin
Most furnace repairs in Justin run $150-$700 and our technicians carry the parts to finish the job same day. If your furnace quit this morning, call (817) 402-2972. A live person answers, and we’ll give you a firm arrival window before anyone heads your way.
We’ve been dispatching crews to Justin from our Dallas-Fort Worth office since 2003, and we know the territory well. From the newer production homes in Timberbrook and Windermere to the rural spreads off FM 407 and FM 156, we’ve worked on heating systems in every corner of this town. Justin sits at the precise frontier of DFW’s northwestward suburban sprawl into rural Denton County, meaning our Furnace Repair calls split evenly between brand-new production homes exiting builder warranties and rural parcels that have never had access to Atmos Energy’s natural gas distribution. That split changes how we diagnose, what parts we stock, and what solutions we recommend. We’re not guessing when we pull up to your driveway. We’ve already been there.
Why Coldharbour Heating & Air Is Justin’s Preferred Furnace Repair Company
We’re independently owned and operated, part of the Kingswell network, and we work to four written promises we put on paper before every job: a price before the work starts, a firm arrival window, a clean job site, and our 365-Day Done Right Promise. If a repair fails within a full year, we come back and correct it at no charge. No argument. No additional invoice.
Our technicians are background-checked, uniformed, and trained on nine major residential HVAC brands including Rheem, York, and Daikin. When you call (817) 402-2972, a live person answers the phone, 24 hours a day, 7 days a week. No voicemail trees. No after-hours runaround. No waiting until morning while your house drops into the 40s.
We were called to a 2014-built home in the Timberbrook subdivision off FM 407 where the original single-stage Carrier furnace was short-cycling on a January morning. Our tech found a failed hot-surface ignitor and a heat exchanger showing early stress cracks, both consistent with the system being oversized for the home’s 3,200 sq ft and running against a static pressure reading of 0.9 in. w.c. from undersized original ductwork. We replaced the ignitor, walked the homeowner through the heat exchanger findings, and quoted a variable-speed upgrade - which they scheduled the following week. That’s how we work. Show the problem, explain it in plain English, and let you decide.
Emergency Furnace Repair in Justin
Emergency Furnace Repair in Justin means your system has failed completely, is blowing cold air, or is cycling on and off so rapidly it risks overheating. We treat these calls as urgent, especially when temperatures drop below freezing and homes with young children or elderly residents are involved. Our standard repair range of $150-$700 applies to emergency calls too - we don’t charge extra for after-hours or weekend work. The price you see on the written estimate before we start is the price you pay.
What Counts as a Heating Emergency
No heat at all on a night below 32°F. A burning smell from the supply vents. The carbon monoxide detector sounding, which always means shut the system off and call us immediately. These aren’t “wait until Monday” situations in Justin, where rural properties especially can see indoor temperatures plunge fast once the sun goes down.
How Fast We Can Get There
When you call (817) 402-2972, we tell you exactly when a technician will arrive, not a four-hour window that stretches into six. Our Dallas-Fort Worth dispatch coordinates crews who already know Justin’s roads - FM 156, FM 407, the neighborhoods north and south of 114. That local familiarity saves time when your house is cold.
Furnace Maintenance in Justin
Furnace Maintenance in Justin is the scheduled, preventive work that keeps your system running through the heating season without surprise failures. We recommend it every fall, before the first sustained cold snap. Our tune-up runs $80-$200, and it includes a complete inspection, combustion analysis, safety check, and written report of what we found. Our technicians are not paid on what they sell, so the report is honest - no invented problems, no pressure.
What the Tune-Up Covers
We clean the flame sensor, inspect the heat exchanger for cracks with a camera scope, test gas pressure or propane regulator output, measure static pressure across the blower, and check all safety limits. In Justin’s production homes, we pay special attention to whether the original ductwork is forcing the blower to work harder than the manufacturer intended.
Why Justin Homes Need This Specifically
Those 3,000-4,500 sq ft production homes built from 2005-2022? Many were fitted with single-stage, single-zone systems to hit builder price points. The thermostat near the master suite reads 74°F while the kids’ rooms at the back sit at 81°F. That’s not a thermostat problem. It’s a load-imbalance problem we catch during maintenance, often before the furnace itself fails from overwork.
Trusted Brands We Service in Justin
Our trucks carry parts for Rheem, York, Daikin, Bryant, and the other major brands we service. That matters in Justin, where a failed ignitor or blower motor on a Saturday evening shouldn’t mean waiting until Tuesday for a warehouse order. We stock locally. We turn around fast. And because our technicians train continuously on all nine major residential HVAC brands - Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard - the person who shows up can actually work on whatever system is already in your home, not just the ones they prefer.
Common Furnace Repair Problems We See in Justin Homes
- Failed hot-surface ignitors in production homes. The ignitor glows white-hot to light the gas, but in oversized systems that short-cycle constantly, it wears out prematurely. We see this pattern repeatedly in Timberbrook and Windermere homes where the original furnace was spec’d too large for the ductwork.
- Heat exchanger stress from high static pressure. When undersized single-zone ductwork forces the blower to push against resistance it wasn’t designed for, the heat exchanger overheats and develops cracks. That’s a safety issue we check on every call, not just maintenance visits.
- Loose supply boots from slab foundation movement. North Texas shrink-swell clay soils shift seasonally, and in Justin’s slab-on-grade homes, that movement pulls duct connections apart. The furnace runs constantly trying to heat rooms that aren’t getting airflow.
- Propane ignition and flame-sensor fouling on rural properties. Outside the subdivisions, where Atmos natural gas never reached, older propane tanks and regulators deliver fuel with variable quality. The flame sensor gets coated, the furnace locks out, and the homeowner wakes up cold.
Pricing for Furnace Repair in Justin, TX
| Service | Price Range in Justin |
|---|---|
| Furnace Repair (diagnostic + parts + labor) | $150-$700 |
| Annual Furnace Tune-Up | $80-$200 |
Most ignitor replacements fall in the $150-$280 range. Blower motor repairs run higher, sometimes $400-$650 depending on whether it’s a standard or variable-speed unit. Heat exchanger work can reach the top of our range, and if the exchanger is cracked, we’ll show you the camera footage and explain why replacement may be the safer long-term choice.
What drives cost up: after-hours emergency calls don’t - we don’t charge overtime - but complex access (crawl space units, attic installations in tight spaces), proprietary parts on certain high-end brands, and secondary damage from delayed repairs do. What we never do: change the price after we gave it to you in writing. That’s The Kingswell Way. Say the price before the work starts. No exceptions.
Every repair comes with our written 365-Day Done Right Promise. If it fails in that window, we return and correct it at no charge. The guarantee is on paper, not verbal, and it’s included on every job - not an upgrade, not conditional.
Call (817) 402-2972 for a free estimate. We’ll diagnose the system, hand you a written price, and let you decide.
We Also Serve Cities Near Justin
Our crews work throughout Denton and Tarrant counties, and we regularly take Furnace Repair in Justin calls alongside jobs in Roanoke, Haslet, Argyle, and Keller. Same standards, same written guarantees, same live-answer phones. If you’re on the edge of our service area and unsure, call - we’ll tell you straight whether we can get there today or whether a closer referral makes more sense.
Serving Justin, TX - Our Local Coverage Area
We’re based in the Justin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Justin
A 2013 furnace in Justin is at the edge of its expected service life, especially if it’s been running against undersized ductwork. If the repair is under $400 and the heat exchanger is sound, repair usually makes sense. If you’re facing heat exchanger replacement or a second major repair in two years, we’ll show you the numbers on a variable-speed replacement that actually matches your home’s load. Call (817) 402-2972 and we’ll give you an honest assessment - estimates are free.
Your original single-zone system was likely sized for the square footage on paper, not the actual load of a 3,500+ sq ft open-concept home with bedrooms at the far end of long duct runs. The furnace runs constantly because it’s trying to satisfy a thermostat that can’t sense those cold rooms. We measure static pressure and airflow at each register to confirm, then recommend either zoning or a properly sized variable-speed system. This is one of the most common calls we get in Timberbrook and Windermere.
Yes. We service propane furnaces on rural parcels off FM 407, FM 156, and throughout the unincorporated areas around Justin. The diagnostic approach differs - we check tank level, regulator output pressure, and fuel quality at the valve - but our technicians are trained for it. If you’re considering switching from propane to a heat pump, we can run the operating-cost comparison using your actual propane bills.
Most furnace repairs in Justin run $150-$700, with the majority falling between $200 and $450. Simple ignitor or flame-sensor replacements stay at the lower end. Blower motor or control board work trends higher. We give you a written price before any work begins, and that price doesn’t change. Call (817) 402-2972 for an exact quote on your system - estimates are free.
It affects the ductwork that delivers your furnace’s heat. Denton County’s heavy shrink-swell clay shifts seasonally, and in slab-on-grade homes, that movement loosens supply boots and duct connections. Your furnace works fine - the heat just escapes into the crawl space or slab void before reaching the rooms. We check for this on every service call in Justin, and we catch it early during maintenance before you’re paying to heat your foundation.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Justin and the Dallas-Fort Worth area since 2003.