Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Kenmore, WA
Most HVAC calls in Kenmore aren’t straightforward fixes. The city’s wet, foggy microclimate at the north tip of Lake Washington and the Sammamish River delta creates moisture problems that turn simple repairs into jobs requiring duct sealing, vapor barriers, and equipment elevation. Coldharbour Heating & Air dispatches crews daily from our Seattle office to handle exactly these conditions. We’re available at (817) 402-2972, with a live person answering every call.
Why Kenmore Homes Are Different
Kenmore sits where the Sammamish River meets Lake Washington, and that water on three sides keeps ground-level humidity higher here than in Bothell or Kirkland just east. The fog lingers longer. Crawlspaces stay damp year-round.
Most of the housing stock was built between the 1950s and 1970s, when this was still unincorporated King County. Ranch-style and split-level homes dominate, many originally heated with oil furnaces or electric baseboard. Forced-air retrofits are common jobs for us now, and they require more than just equipment swaps. The existing ductwork often runs through crawlspaces where moisture has degraded insulation and loosened tape seals.
Down near the river delta, especially in low-lying streets around Saint Edward State Park and the waterfront, we routinely find outdoor condenser pads that have settled into soft ground or flooded during winter highs. Crawlspace air handlers sit in standing water. We don’t treat vapor barriers and equipment elevation as extras here. They’re standard scope because without them, the repair won’t last.
Our Main Kenmore Services
Kenmore homeowners call us most often for cooling repairs in July and August, and for heating repairs when the first real cold arrives in November. Here’s what each job looks like in this market.
AC Repair in Kenmore
AC repair here often starts with a no-cool call and ends up involving more than the compressor or capacitor. The high humidity corrodes outdoor coil fins faster than inland markets, and we’ve replaced contactors that failed early from moisture intrusion. When we diagnose your system, we also check whether the condensate drain is clearing properly and whether the indoor coil is dealing with excess latent load. AC Repair in Kenmore covers our full process and what we stock on the truck.
Furnace Repair in Kenmore
Furnace repair in Kenmore means working on a mix of aging gas conversions, original heat pumps, and the occasional remaining oil system. Igniter and flame-sensor failures are common on 15-plus-year-old units, but we also see heat exchangers compromised by years of cycling in damp crawlspaces. We test for carbon monoxide on every furnace repair and inspect the surrounding area for moisture damage that could affect the new part’s lifespan. Furnace Repair in Kenmore has more detail on our diagnostic process.
AC Installation in Kenmore
New AC installation in Kenmore almost always requires load calculation adjustments for the humidity, and often ductwork modifications for homes that weren’t built for central air. We size systems to handle the latent load properly, not just the temperature drop, and we inspect existing ducts for leaks that would waste capacity. Many Kenmore installations also involve raising equipment off crawlspace floors or adding vapor barriers. AC Installation in Kenmore explains sizing, pricing, and what a typical timeline looks like.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kenmore
Our technicians carry training and common parts for nine major residential brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. In Kenmore, we see a lot of older Trane and Goodman systems, plus newer Lennox heat pumps. We stock capacitors, contactors, igniters, and flame sensors locally, so most repairs don’t wait on parts. See our brands for full coverage.
Pricing for HVAC Company in Kenmore, WA
| Service | Typical range in Kenmore |
|---|---|
| AC Repair | $150-$650 |
| Furnace Repair | $150-$700 |
| AC Installation | $3,500-$7,500 |
| Tune-Up | $80-$200 |
What pushes Kenmore jobs toward the higher end: moisture-damaged electrical components, ductwork repairs in tight crawlspaces, and equipment elevation or vapor barrier work that other markets don’t need. We give you a written price before any work begins, and that number doesn’t change when we’re done.
Neighborhoods We Serve in Kenmore
We run calls across the full city, from the hillside homes near Kenmore Elementary down to the river-adjacent streets by the boat launch. Most of our Kenmore appointments are scheduled within a two-hour arrival window, and emergency calls during heating or cooling season typically see a technician the same day.
- Arrowhead
- Inglewood
- Kenmore Terrace
- Northshore
- Uplake
Service Area – Cities Near Kenmore
Our crews work Kenmore daily from the Seattle office, and we regularly cross into neighboring communities for calls. We also serve Bothell, WA to the east, Woodinville, WA to the northeast, Lynnwood, WA to the west, and Mountlake Terrace, WA to the southwest. Scheduling and dispatch are coordinated centrally, so coverage across this corridor is seamless.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Kenmore
We schedule most Kenmore appointments within a two-hour arrival window, and emergency no-heat or no-cool calls during peak season are usually same-day. Call (817) 402-2972 to check current availability.
Most furnace and AC replacements require a King County mechanical permit, which we pull as part of the job. Historic districts or shoreline properties near Lake Washington may have additional requirements, and we handle that paperwork on installations.
Yes. Many Kenmore homes still run oil-to-gas conversions or early heat pumps, and our technicians are trained to diagnose and repair these systems. If replacement makes more sense, we’ll explain why and give you a fixed written price for that too.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kenmore Customers Say
"Thermostat and a weak blower. Fixed both in one visit, explained the guarantee, and didn't leave a mess. I've already recommended them to my neighbor."
- Natalie Esposito"Honest to a fault. Two companies told me I needed a whole new unit. Coldharbour said mine had years left and just needed a cleaning and a part. Saved me thousands."
- Marcus Reilly"Furnace wouldn't light the first cold morning. The guy walked me through what he was checking so I actually understood it. Replaced the igniter, wrote up the warranty, and it's been warm since."
- Alicia Romero