Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Kenmore
Most homeowners in Kenmore, WA can expect to pay between $3,500 and $7,500 for a complete AC installation, with heat pump conversions and ductless mini split systems falling inside that same range depending on the home’s existing infrastructure. Our AC Installation team serves Kenmore from our Seattle dispatch office, and we typically schedule installation consultations within 48 hours of your call. You can reach us anytime at (817) 402-2972; a live person answers the phone 24 hours a day, every day of the year.
We’re familiar with the specific challenges that come with installing cooling equipment in Kenmore’s damp, river-adjacent environment. The confluence of the Sammamish River and Lake Washington creates a persistently wetter microclimate than neighboring Bothell or Kirkland, which means every installation we do here accounts for moisture management, equipment elevation, and corrosion protection from day one. This isn’t generic suburban HVAC work. Kenmore’s slab-and-pier ranch homes, seasonal high water tables, and foggy shoreline conditions demand a different approach to sizing, placement, and ductwork sealing than you’ll find ten miles east.
Why Coldharbour Heating & Air Is Kenmore’s Preferred AC Installation Company
We’ve been part of the Kingswell network since 2003, and our independently owned and operated structure means decisions about how we serve Kenmore are made locally, not by a distant corporate office. Our technicians are background-checked, uniformed, and trained on nine major residential HVAC brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. When we arrive at a home near Saint Edward State Park or along Juanita Drive, we’re arriving with the right parts and the right training for whatever system is already in place.
Response time matters here because Kenmore’s weather turns quickly. We keep our scheduling tight and our arrival windows firm; The Kingswell Way demands we show up when we say we will and leave the job site cleaner than we found it. Every installation comes with a written price before any work begins and a written guarantee before the technician leaves. The 365-Day Done Right Promise means if anything we install fails within a full year, we return and correct it at no additional charge. No argument, no additional invoice.
Our reputation in Kenmore has been built on jobs where moisture was the real enemy, not just temperature. Homeowners here have seen what happens when a condenser pad settles into seasonal groundwater or when crawlspace ductwork goes unsealed in a home that sits in fog six months of the year. We address those conditions as standard scope, not as surprise add-ons after the contract is signed.
Ductless Mini Split Installation in Kenmore
Ductless Mini Split Installation in Kenmore is often the right solution for the post-WWII ranch homes and split-levels that dominate neighborhoods like Arrowhead and Inglewood, where many houses were built with oil furnaces or electric baseboard heat and never had ductwork installed. A ductless system uses an outdoor condenser connected to one or more indoor wall-mounted air handlers, each with its own temperature control, so you don’t need to tear open walls or crawlspaces to add cooling. In Kenmore’s market, a typical ductless mini split installation runs $3,500-$7,500 depending on the number of zones and the electrical work required.
When Ductless Makes Sense for Older Homes
If your Kenmore home was built in the 1950s through 1970s and has no existing forced-air system, ductless avoids the major retrofit of adding supply and return plenums through a damp crawlspace. We see this frequently in the unincorporated-era subdivisions near Kenmore’s northern border, where slab-and-pier construction makes traditional ductwork expensive and moisture-prone. The indoor units mount high on exterior walls and connect to the outdoor condenser through a small refrigerant line set.
Zoning for Variable Lake-Effect Cooling
Kenmore’s lakeside fog can keep the first floor of a home ten degrees cooler than the upper level on summer mornings. Ductless mini splits let you cool the upstairs bedrooms without overcooling the downstairs living area. Each zone operates independently, which also means if one air handler needs service, the rest of the house keeps running.
AC Replacement in Kenmore
AC Replacement in Kenmore often starts with a system that failed prematurely because of conditions the original installer didn’t account for: a condenser that sat in standing water, a control board damaged by a generator transfer surge, or a blower motor that corroded in a wet crawlspace. When we replace a system here, we’re not just swapping boxes. We’re correcting the moisture, elevation, and electrical protection issues that killed the first unit. A full AC replacement in Kenmore typically costs $3,500-$7,500, which includes the new equipment, pad or mounting corrections, electrical connections, and any necessary ductwork sealing.
Flood-Damaged Condenser Replacement Protocol
If your outdoor unit sat in seasonal high water near the Sammamish River delta, we don’t simply set a new condenser on the same sunken pad. We raise the equipment on a composite pad above the historical high-water line, verify proper drainage, and test the electrical integrity of the entire circuit before the new unit ever energizes. This is standard on our Kenmore replacements, not an upgrade package.
Heat Pump Conversion for Oil and Baseboard Homes
Many Kenmore homes still run on oil or electric resistance heat. A heat pump replacement gives you both heating and cooling from one outdoor unit, and modern cold-climate heat pumps perform efficiently well below freezing. We size these systems for the damp, moderate winters of north Lake Washington, not for a dry continental climate, which changes both the equipment selection and the defrost strategy.
Trusted Brands We Service in Kenmore
Our technicians carry training certifications and common parts for nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Kenmore homeowners, this means we don’t need to special-order a capacitor or contactor and make you wait a week in July. We stock components for Goodman and Rheem systems commonly installed in the Pacific Northwest, and we maintain supplier relationships that let us source Daikin and York heat pump components quickly when a full replacement is needed. Whether you’re maintaining an existing system or installing new, the technician who arrives at your door can work on what’s in front of them without calling for backup.
Common AC Installation Problems We See in Kenmore Homes
- Settled condenser pads in the river delta. The low-lying streets near the Sammamish River routinely see seasonal groundwater that shifts or submerges outdoor equipment. A condenser that has been underwater must never be switched back on before a technician dries and tests the capacitor, contactor, and compressor windings. Sending current through water-laced components destroys them instantly.
- Wet crawlspace air handlers accelerating corrosion. Kenmore’s slab-and-pier homes often have air handlers sitting inches above dirt that stays damp eight months of the year. Without proper vapor barriers and sealed duct connections, new high-efficiency equipment gets installed into a wet environment that triggers mold and premature blower motor failure.
- Power surge damage hidden by fog and corrosion. The north Lake Washington microclimate keeps outdoor electrical components perpetually moist. When a generator transfer or outage surge spikes a control board, the damage may not show until the next cooling call because corrosion has already compromised the connections.
- Undersized ductwork from original baseboard or oil conversions. Homes built for radiant or gravity heat often have inadequate return air pathways for a modern forced-air system. We measure static pressure and airflow before specifying equipment, because a powerful new condenser connected to restrictive ductwork will short-cycle and fail early.
Pricing for AC Installation in Kenmore, WA
We’re upfront about what this work costs because The Kingswell Way says you get the price in writing before a single tool comes out. Here’s what homeowners in Kenmore typically see:
| Service | Typical Range in Kenmore |
|---|---|
| AC Installation (full system) | $3,500 - $7,500 |
| AC Repair | $150 - $650 |
| Tune-Up / Maintenance | $80 - $200 |
Your final installation price depends on the equipment size needed for your home’s heat load, whether we’re adding ductwork or converting from oil/baseboard, the electrical service capacity, and any elevation or moisture-protection measures specific to your property. A home near the Sammamish River delta with a flooded pad and no existing ductwork will land differently than a straightforward swap on a raised lot in Arrowhead. We perform a full load calculation and home evaluation before quoting, and the estimate is always free. Call (817) 402-2972 to schedule yours.
We Also Serve Cities Near Kenmore
Our crews work throughout the north King and south Snohomish county area, including AC Installation in Kenmore and surrounding communities. We regularly install systems in Bothell, Mountlake Terrace, Lynnwood, and Woodinville, and we understand how the microclimate shifts from the Sammamish River valley to the I-5 corridor. Scheduling and dispatch are coordinated from our Seattle office, with local technicians assigned to minimize drive time and keep arrival windows reliable.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Kenmore
No. A flooded condenser must never be re-energized before a technician dries and tests the capacitor, contactor, and compressor windings; sending current through water-laced electrical components will destroy them and potentially create a safety hazard. Call (817) 402-2972 and we’ll dispatch someone to assess the damage and give you a written price for recovery or replacement before any work begins.
Kenmore’s ground-level humidity is exceptionally high even by Western Washington standards, and the slab-and-pier construction common here leaves ductwork and air handlers exposed to standing moisture through the long wet season. Without proper sealing and vapor barriers, new equipment gets installed into a wet system that grows mold and corrodes blower motors. We treat moisture management as core scope on every Kenmore installation, not an optional upsell.
Yes, and we recommend both for Kenmore homes because power outages and generator transfers during storm season routinely spike control boards and capacitors. The foggy north Lake Washington microclimate already keeps outdoor electrical connections moist, which means surge damage often hides under corrosion until the next cooling call. We can discuss surge protection and safe generator transfer protocols during your free estimate.
We perform a Manual J load calculation that accounts for the home’s insulation, air leakage, window orientation, and the specific moisture conditions of the site, not just square footage. River delta homes often need dehumidification capacity prioritized alongside cooling load because the wet microclimate makes indoor air feel warmer than the thermometer reads. The equipment we specify is rated for the actual conditions it will face, not a generic climate zone chart.
Yes, and this is one of the most common installations we do in Kenmore’s 1950s-1970s neighborhoods where oil furnaces or electric baseboard were original. Ductless mini splits need only a small refrigerant line set and power run between the outdoor condenser and indoor wall units, so we can add cooling without opening walls or building ductwork through a damp crawlspace. Most of these installations fall in the $3,500-$7,500 range depending on the number of zones.
Written by Victor Mancini, Owner at Coldharbour Heating & Air, serving Kenmore and the greater north Lake Washington area since 2003.